CV Fabrication Performance Intercooler for the 2020-2025 Explorer ST

CV Fabrication Performance Intercooler for the 2020-2025 Explorer ST

Explorer ST Cooling

CV Fabrication Performance Intercooler for the 2020-2025 Explorer ST

Overview

CV Fabrication's Performance Intercooler for the 2020-2025 Explorer ST is a serious cooling upgrade. It uses a bar-and-plate core made from billet aluminum with high-flow cast end tanks, engineered to put cooler, denser air into the intake versus the stock unit. In real-world driving it delivers over an 85 degree F reduction in charge-air temperatures, with 214% more internal volume and 260% more frontal cooling surface to fight heat soak under boost. It is a direct-fit, bolt-on swap backed by CVF's lifetime warranty, a key supporting mod for tuned cars, daily drivers, and spirited street or track use.

CV Fabrication performance intercooler for Explorer ST

Installation Overview

Because of the Explorer's design, this install requires some front-end disassembly, including removing the bumper. With the right tools and a helping hand, plan on roughly 3 hours.

  1. Remove the front bumper cover. Lift the front, remove both front wheels and the underside splash shield, pull the pushpins and bolts holding the fender flares and liners, then remove the bumper mounting bolts and grille bolts, disconnect the harnesses, and remove the cover.
  2. Remove front-end components. Take off the shroud assemblies, headlights, and front impact bar, drill out the radiator shroud/vent rivets, disconnect the hood release cable and harnesses, and remove the shroud/vent assembly to access the intercooler.
  3. Swap the intercooler. Remove the PCV fitting and sensor harness, the driver-side bolt, and the locking clips, then pull the stock intercooler and install the CVF unit in its place. Reassemble in reverse.
This is a more involved install than a bolt-on. If you are not comfortable pulling the front end, we can point you to a shop. Call 561-753-8105.

FAQ

Does CVF make intercoolers for other vehicles?

Yes, they offer intercoolers for the F-150, Bronco, Bronco Raptor, and many other EcoBoost applications.

Will this void my warranty?

Installing an intercooler should not change your factory warranty, though if a warranty issue arises they typically must prove the intercooler caused it.

Is there a downside to a larger intercooler?

Only a little added weight from the bigger unit, and the cooling benefits far outweigh it.

Will it increase power on its own?

Not directly. It flows better and provides cooler, denser air, which supports more consistent power, but the gains come from tuning and the cooler charge, not the intercooler alone.

Shop

Beat Heat Soak on Your Explorer ST

Over 85 degrees cooler charge air, 260% more frontal surface, direct bolt-on, lifetime warranty. Shop the CVF intercooler.