UMI Performance Spring Spacer, 1/8” - 90062
UMI’s rear spring spacers may be just the ticket to achieve that perfect stance or prevent tire rub. UMI’s zinc coated, laser cut mild steel spacers are available in 1/8” and 3/16” thickness and can be safely stacked. They provide an easy way to fine tune the rear ride height of your GM A, G and F-Body. No cutting, welding or drilling required. We recommend these for fine-tuning only, and maximum adjustment amount is the responsibility of the installer. Normal installation position is on the upper perch although lower perches may have adequate height (F-Body lower perch only). 100% manufactured, tested and raced out of Philipsburg, PA – USA. P/N 0062 is for one 1/8” spacer.
UMI Performance bump steer kits relocate the outer tie rod pivot point which results in decreased toe change during wheel travel. Standard kits include sleeves, rod ends, jam nuts and high quality, direct fit tapered studs. Race kits require drilling of the spindle and include heavy duty 5/8 bolts. Race kits are recommended for autocross and road race applications while standard kits are indicated for street/strip use.
