Tick Performance Hi-Flow Transmission Fluid Pump - TPTFP
The Tick Performance Transmission Fluid Pump is a high-flowing pump
designed to maintain a constant flow of fluid throughout your entire
transmission. Spec’ed to work with our Tick Performance Bungs and Sprayers,
the pump will adequately lubricate the entire transmission during
aggressive launches.
The two common weak points in high-output T56 and TR6060 transmissions are
the input gear and countershaft mating gear, which often fail due to a lack
of lubrication. Hard acceleration will shift fluid to the back of the
transmission case, adding extra heat and wear to those front gears. Also,
these two gears are under constant load—except in 4th gear—meaning proper
lubrication is vital.
We highly recommend Bungs and Sprayers in high-output and race-only
applications. These two forward gears are also two of the most expensive
gears in the T56 and TR6060. Read more about Bungs and Sprayers in our Transmission Rebuilds.
We install Bungs and Sprayers in house here in the Tick Performance
transmission department, with two -6AN fittings. Our new pump is designed
to be easily mounted and plumbed with our -6AN universal line kit (coming
soon). Now, you can get everything you need in one stop.
Kit Includes:
We strive to produce simple kits and quality components. All Tick
Performance Transmission Fluid Pumps include an Earl’s inline filter with
-6 AN fittings and two -6AN fittings for the pump itself. The Earl’s line
filter features a removable and cleanable stainless steel element.
TP Transmission Fluid Pump
-6AN Earl’s Inline Filter
4x Rubber Isolators
4x Isolator Inserts
2x Earl’s -6AN O-Ring Fittings
Pump Specs:
Flow: 2.6 GPM
Fuse: 15A
Max Pressure 58 psi
Self Priming 4.9 ft
Mounting Hardware:
1/4in or 6mm bolts or screws are recommended, but not included
Installation:
Please consult the instructions before installation. The pump flow is
directional but can mount in any orientation (right-side up or upside
down). The pumps include rubber isolators and isolator inserts to help
maintain pump life no matter the mounting location.
It is recommended not to run the pump for more than 20 minutes dry, any
longer can cause damage to the pump. It is vital to always run a clean and
new inline filter before the pump.
Wiring is simple, with the red wire requiring a 12v source and black a
clean chassis ground. It’s highly recommended to trigger the pump via an
automatic or computer-controller switch. Constant running of the pump, such
as street driving, is not recommended, and extended continuous use of the
pump can hinder its life span.
Download Instructions:
Click here for a pdf of instructions.
snippet location product_description
