Texas Speed and Performance Gen 3 Hemi Stroker Cam Stage 2
Unlock the potential of your big cubic inch Hemi engine with the Texas Speed and Performance Gen 3 Hemi Stroker Camshaft. Designed for max effort naturally aspirated applications, this camshaft delivers significant peak power and high RPM performance.
Camshaft Specifications
Duration @ .050” (Intake/Exhaust): 247°/259°
Lift (Intake/Exhaust): .622"/.618"
LSA: 112°
ICL: 110°
*** VCT Lockout is Required to Run this Camshaft ***
Engine Compatibility
Best Suited For: 2009+ Gen 3 Hemi Stroker 410+ Cubic Inch
Performance Highlights
Power Output: 715 Peak HP, 575 Peak Torque
Operating RPM Range: 1000-7500 RPM (max)
Drivability: Max effort naturally aspirated applications
Required Components
Valve Springs: PAC-1232X or PRC-VS2226 springs required
Pushrods: TSP 3/8 Pushrods required
Pistons: Aftermarket pistons with valve reliefs required
Recommended Components
Retainers: TSP titanium retainers
Rocker Braces: TSP rocker shaft braces recommended
Stall Converter: 3600+ recommended
Rear Gear: Gear selection varies based on application
Dyno Test Motor Specs
Short Block: TSP 426 Brawler
Cylinder Heads: Stock 6.4 heads PRC ported with PAC valve springs and TSP retainers
Intake: Holley Hi-Ram with 102mm throttle body
Compression Ratio: 11.3:1
Camshaft Timing: VCT phaser locked
Fuel: 93 Octane pump gas
With extensive dyno testing, the Texas Speed and Performance Gen 3 Hemi Stroker Camshaft is engineered to deliver reliable and measurable performance gains, making it an ideal choice for high-performance naturally aspirated Gen 3 Hemi builds.
