Texas Speed and Performance Gen 3 Hemi Stroker Cam Stage 1
Unlock the potential of your big cubic inch Hemi engine with the Texas Speed and Performance Hemi Stroker Camshaft. Designed for street/strip applications, this camshaft delivers significant power gains and a broad, flat torque curve, ensuring exceptional performance across the RPM range.
Specifications
Duration @ .050” (Intake/Exhaust): 238°/253°
Lift (Intake/Exhaust): .622"/.618"
LSA: 110°
ICL: 109°
*** VCT Lockout is Required to Run this Camshaft ***
Engines Best Suited For
2009+ Gen 3 Hemi Stroker 410+ Cubic Inch
Performance Highlights
Power Output: 699 Peak Power, 577 Peak Torque
Operating RPM Range: 1000-7200 RPM (max)
Drivability: Designed for Street/Strip applications
Required Components
Valve Springs: PAC-1232X or PRC-VS2226 springs required
Pushrods: TSP 3/8 Pushrods required
Pistons: Aftermarket pistons with valve reliefs
Recommended Components
Retainers: TSP titanium retainers
Rocker Braces: TSP rocker shaft braces recommended
Stall Converter: 3600+ recommended
Rear Gear: Gear selection will vary depending on application
Dyno Test Motor Specs
Short Block: TSP 426 Brawler Short Block
Cylinder Heads: Stock 6.4 heads PRC ported with PAC valve springs and TSP retainers
Intake: Holley Hi-Ram Intake w/ 102mm throttle body
Compression Ratio: 11.3:1
VCT: Phaser locked
Fuel: 93 Octane pump gas
Performance & Reliability
Backed by extensive dyno testing, the Texas Speed and Performance Gen 3 Hemi Stroker Camshaft delivers proven horsepower and torque gains. Whether you're building a high-performance street car or a drag machine, this camshaft is engineered for reliability and optimal power output.
