On3 Performance Coolant Crossover Delete v.2 – 2 Port - CCD2
"All the details to this kit are found just below the options. I wanted to
post this information at the top so you know exactly what your getting.
The middle photo with the white background shows the CCD kit produced by
On 3 Performance. Shown in the photo is the 1 TEMP SENSOR PORT KIT. This
page is to purchase the 2 TEMP SENSOR PORT KIT. So that means that with
your order for $190, its going to include 2 of the DR. side fittings shown
in the photo. Your kit will include the housing along with 2 of the DR.
side fittings shown to be clear. We can put this together in any
combination you might want and have the upgrades listed in the list below.
Some factory cars have 2 coolant temp sensors and other customers will only
need one but use the 2nd port for a gauge. Doesnt get much simpler to get
reference when adding an aftermarket gauge while cleaning up the overall
look under-hood."
Also many people have issues after time with the factory coolant crossover
leaking and needing replaced. This is a great option to not only replace
the leaking factory unit but give the engine bay an updated look. Now you
can replace the factory boring upper rubber hose with a more appealing
braided line kit. This is sold separately and can be had for just $69.
This includes your necessary AN fittings and 4’ of our custom braided
nylon black hose.
Our kit is perfect for Marauder crowd which already has braced us and
continues to be a big supporter of our product. Also the centrifugal
supercharger users have the blower and air filter inlet directly in this
path. Many of these people are running our products to allow for easier
routing of the coolant line as well as the cooling benefits that come along
with its use. We have customers running our kits on retrofitted 4v’s into
early cars, truck to cobra replica builds.
Each kit has a 1 temp sensor port or 2 temp sensor ports. Depending on the
car model its being used on, some have a secondary temp sensor which would
require the 2nd option kit. If your planning on running an aftermarket
coolant temp sensor, this is a very sleek way to gain access to the coolant
for a hassle-free install. You would just choose option listed for the
additional coolant temp sensor port
Key Details To v.2 Coolant Crossover Delete:
THIS KIT IN SPECIFIC IS THE 2 TEMP SENSOR PORT 3 PIECE KIT:
Each 3pc kit will also include the hold down tabs and bolt to secure.
A lot of the 4v guys also like to run the head cooling mod since its
believed that the cylinder #7 & #8 have a pocket that doesn’t allow for
circulation. This heats up the coolant around this area and is believe to
cause engine failure in some instances. We can also include an additional
Head Cooling Mod fitting for the rear port of the head at the same time of
purchase for $30.
