Lethal Performance 07-2012 GT500 Pulley Pack with PMAS Cold Air Intake
Package Includes:
PMAS Cold Air Intake
Metco Motorsports 2.60" Supercharger Pulley
Metco MSI-90D Dual Ball Bearing 90mm Auxiliary Idler Kit
Handheld Tuning Device
Custom Calibration of your choice from either Lund Racing, Li Tuning & Racing or Palm Beach Dyno
NGK TR6 Spark Plugs (Set of 8)
PMAS Cold Air Intake
PMAS Velocity Air Intake systems are designed with maximum flow as the first priority.
Patented mass air flow sensing system.
Smooth stable idle flow for stock drivability.
Computer re-flash required
MORE FLOW = MORE HORSEPOWER!
Massive 120mm tube with no MAF resolution loss.
Custom open base filter design for maximum flow.
No inserts or restrictions.
No “tricking” the factory computer and restricting flow.
‘Velocity Stack” inlet design maximizes laminar airflow.
“CFD” modeled system for minimum restriction.
Rugged, injection molded and billet aluminum MAF system.
Lifetime washable S&B filter.
Metco GT500 Auxiliary Idler Kit with Double-Bearing Idler
All new from Metco Motorsports is the Aux Idler Kit with their new Double Ball Bearing Idler. The Double Ball bearing idler will handle the abuse of higher boost cars that spin the belt drive faster than normal. In addition to that the Aux Idler system is adjustable to help take up slack in the belt from different pulley combination's as well as assist in eliminating belt slip.
The Metco Motorsports auxiliary idler kit for the Shelby GT500 is cleverly engineered to be a simple bolt on and to be the ultimate solution to belt slippage.
The kit consists of a heavy-duty, precision-machined aluminum plate that offers three locations for the included 90mm double-bearing idler pulley. The plate bolts to existing bolt bosses on the vehicle and locates the pulley just to the left of the supercharger pulley, maximizing belt wrap and eliminating slippage. No modifications to the vehicle are necessary. The required fasteners are included, as well as illustrated installation instructions.
NOTE: Will not fit Whipple 4.0L Supercharger
Metco 2.60" Supercharger Pulley
Replace the original 3.00" supercharger pulley with one of our precision-made supercharger pulley kits to add boost to your Shelby Mustang. The kit includes a pulley hub machined from high-grade steel that presses onto the blower shaft. The CNC-machined aluminum ring bolts to the steel hub using the supplied stainless steel fasteners, and this two-piece design makes subsequent pulley ring changes a snap.
The steel hub is re-usable (unlike aluminum one-piece blower pulleys), and is nickel-plated for long lasting surface protection. The aluminum ring is hard-coat anodized in black to resist surface wear, and after anodizing the ring is pocket-milled for good looks (2.60" ring only, shown second from left).
We recommend the use of our Auxiliary Idler Kit (Metco Motorsports PN MSI-90) with this supercharger pulley. When these two components are installed together, the vehicle's original serpentine belt can be re-used.
Note 1: Due to the extremely tight interference fit of the factory supercharger pulley on the Shelby GT500 and the weak design of the pulley itself, the factory pulley is often damaged upon removal. To change pulleys, the use of a hydraulic press is recommended but a high-quality pulley removal and installation tool can also be used. We manufacture our own pulley tool and it is available under Metco Motorsports PN MPT0001, listed elsewhere in this section.
Note 2: In addition to the overdrive (smaller) supercharger pulleys, Metco Motorsports offers a stock-sized 3.00" diameter supercharger pulley ring for this application. If the need arises to return to the stock boost level, pulley rings are available separately (listed elsewhere in this section) and can be changed in minutes.
NGK TR6 V-Power Spark Plugs (Set of 8)
Replace your stock plugs with these NGK TR-6 Plugs, there are one step colder than stock. These are a must when changing out your supercharger pulley to create more boost. The colder plug will help prevent detonation from the increased heat the motor see's from higher boost levels.
Tuning Options from The Tune Shop
Lund Racing
As mentioned, we have been using Lund Racing for a decade. The team at Lund Racing have tuned 1000s of applications from bolt-ons to 1000+rwhp forced induction cars both stateside and across the globe, now specializing in 2011+ Mustangs & Shelbys. They hold countless records and take pride in each and every build.
Palm Beach Dyno
While Palm Beach Dyno is newer to the scene as a shop, the head tuner & owner Ken Bjonnes has been in the tuning business for well over a decade. Working for/running established companies like Modular Depot, DiabloSport & more, he has made a name for himself in the Mustang performance industry. Located in South Florida, Ken’s extensive experience with multiple applications has given him a large & varied catalog of tunes to build from. Palm Beach Dyno strives to be on the leading edge of tuning & performance and goes above & beyond to support their customers, including those of Lethal Performance. Add Mr. Rob "Tunemaker" Shoemaker's expertise into the mix and now you're in business.
