KPM Fuel Systems 1500hp Intank Fuel System Package - Includes, PWM Module - AUP-KPMCAM51500PWM
Part No.:
Camaro Gen 5 (2010-2015):
Part No.: AUP-KPMCAM51500PWM
KPM Fuel Systems are proud to release the highest level of direct fit fuel
systems for the Camaro Gen 5 (2010-2015) range of vehicles.
With the modern Camaro being tuned to amazing power levels comes the need
for a high performance fuel system.
KPM have met this need with a direct replacement high performance fuel
system that will perfectly support power levels from standard all the way
to 1500 hp.
No other Camaro fuel module supports as much power with the efficiency,
functionality, and fuel delivery of the KPM 1500 hp fuel systems!
KPM 1500 hp Fuel Module
The
KPM 1500 hp Fuel Module
is engineered, utilizing 2x high performance Bosch Racing fuel pumps, all
housed in an OEM style high-flow fuel canister and distribution manifold.
The KPM fuel module is mounted and immersed in the vehicle’s fuel tank as
per OEM design and for ease of fitment.
The development and testing of the KPM module were focused on supplying
guaranteed delivery of cool, dense fuel to support 1500 hp at the engine on
pump fuel. Our objective was also the supply of solid fuel delivery in both
everyday road driving and extreme track conditions, regardless of fuel
level in the tank
To achieve these objectives, our KPM Fuel System engineer designed and
incorporated a
four
Venturi pump and refill valve system designed to scavenge fuel from both
sides of the Camaro fuel tank and permanently keep the fuel canister full.
This means that you can run the KPM fuel module at any fuel level safely
across all conditions, without the risk of surge or fuel starvation
including during spirited driving, circuit days or drag racing.
The fuel pumps are both 100% gasoline and ethanol compatible and able to
deliver massive amounts of cool, dense fuel at standard vehicle voltages.
This equates to optimum tuning and power levels up to 1500 hp
(flywheel rated on 94 octane fuel)
.
KPM PWM Fuel Module Controller
KPM Fuel Systems have designed a Pulse Width Modulated (PWM) Fuel Module
Controller that can electronically run the two pumps housed in the KPM 1500
hp Fuel Module and also be further upgraded to run the three fuel pumps as
housed in the KPM 2200 hp Module .
We have called it the
KPM PWM Fuel Module Controller
Its main purpose is to control the supply of fuel flow in accordance with
the engine power and fuel demand.
It does this by electronically controlling the amount of current supplied
to the fuel pumps.
The
KPM PWM Fuel Module Controller
has been designed to be a direct fit addition to all KPM 1500 hp and 2200
hp Fuel Systems.
Less fuel pump current = less heat = cooler fuel = more power
Supplying fuel to support 1500 hp and beyond requires two or more high flow
fuel pumps, housed in one or more in-tank fuel modules. The drawback to
this scenario is that two or more fuel pumps can generate quite a lot of
fuel pump current meaning increased heat.
This transfer of heat needs to go somewhere and therefore, heats the fuel
in the tank.
This is generally not a concern however, if the vehicle is idling or being
driven for long periods with a low level of fuel in the tank, the fuel may
start to reach a point of losing its full energy potential or start
vaporizing in the pumps or fuel lines. This can cause long cranking times
and hard re-starts. In the worst cases, the fuel pumps will start to
cavitate, lose pressure and not supply fuel as intended.
The KPM PWM controller is pre-programmed to monitor your vehicle fuel
pressure across all engine loads which in turn allows the controller to
calculate the required level of electrical current to your fuel pumps. This
in turn delivers the correct amount of fuel to your engine as required in
all conditions.
Cooler fuel increases performance
Vehicles with a Factory Fuel System Control Module (FSCM)
Camaro Gen 5 (2010-2015)
The KPM PWM Fuel Module Controller comes complete with wiring to be
connected to the vehicle’s factory FSCM to read the OE signals. The KPM PWM
Fuel Module Controller uses the OE signals from the FSCM to calculate the
correct current required to run the pumps accordingly. The KPM PWM can also
be programmed utilizing the OE fuel system programming tables.
There may be a time when your 1500 hp Fuel and PWM System needs upgrading
if you decide to increase your engine power level even further.
KPM Fuel Systems has you covered!
There is no need to replace your 1500 hp Module and PWM System, just add to
it with the correct choice of KPM Upgrade Fuel System package to meet your
needs.
KPM Fuel System engineers have done all the design work to offer a direct
fit upgrade for your KPM 1500 hp Module ensuring your fuel system fits and
works perfectly. NO guess work! Fit and forget!
Additional to your 1500 hp Fuel and PWM System we offer the following
upgrade package:
The
KPM 1500 hp Fuel and PWM System
is a direct replacement system with the addition of the PWM easily mounted
as per the instructions provided.
The only extra requirement is to route the high amperage wiring and
connector kit that comes supplied with easy fit OEM style plug and play
connectors.
The KPM 1500 hp fuel system is now ready for your tuning professional to
calibrate your fuel system and tune your vehicle as normal with any
well-known tuning software.
Camaro Gen 5 (2010-2015):
Part No.: AUP-KPMCAM51500PWM
Stuck with your installation?
Find all of our fitting instructions
here
