ICON's 4-5.5” Lift Stage 4 Coilover Conversion System features 2.5 Series remote reservoir coilovers that provide superb on-road comfort and off-road performance while at the same time allowing for end-user ride height adjustability. These bolt-in coilovers also allow the option to mount secondary shocks in the stock location, effectively doubling shock damping ability. Their remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Fabricated radius arms offer significantly more strength over the OE units and feature built in caster cams for on-vehicle caster adjustment, maintenance free bushings, and improved tire clearance at full steering lock, all while eliminating the need for drop brackets and thus raising ground clearance under the chassis. The fabricated track bar drop bracket allows the axle to be properly centered under the frame and reduces road feedback throughout the steering system with improved on- and off-road manners thanks to the elimination of bump steer. An adjustable track bar allows for on-vehicle adjustment to fine tune track alignment as well as eliminating the deflective OE track bar bushings for an overall more rigid unit to improve the vehicles handling characteristics.
- Fabricated radius arms provide increased strength, on vehicle caster adjustment, improved tire clearance at steering lock, and higher ground clearance
- Adjustable track bar allows fine tuning of track alignment and improves handling characteristics
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- Track bar drop bracket reduces track bar angle and corrects bump steer geometry
- Corrosion resistant anodized steering stabilizer shock bodies with 5/8" shafts
- Ride height adjustable ICON 2.5 Series coilovers provide 4-5.5" of front lift
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
- Corrosion resistant hard anodized rear shock bodies with 7/8" shafts
- Dual steering stabilizer kit offers increased steering damping
- Lifetime guarantee against coil spring breakage or sagging
- ICON 2.5 Aluminum Series piggyback reservoir rear shocks
- Increased wheel travel and ride quality over stock
- Bolt-in system fits in OE coil bucket location
- Shocks are fully rebuildable and re-tunable
- Stainless steel braided front brake lines
- Fits 2023 F-250 / F-350 4WD applications
- Heavy-duty fabricated rear lift blocks
