Edelbrock Rollin' Thunder camshaft #3722 - 3722
Edelbrock Rollin' Thunder camshaft #3722 is designed for 5.0L Ford V8 engines and produce optimum torque from the low-end to the mid-range.
Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered, manufactured, and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.
Edelbrock Rollin' Thunder Camshaft #3722 is designed for 5.0L Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 300HP and 325 Ft Lbs of Torque when paired with Performer intake manifold #3821 and Performer cylinder heads #60379. May use original hydraulic roller lifters. Our #3722 camshaft is for mass-air engines only. Must use high stall torque converter. 50-State Legal E.O. #D-215-14. , Camshaft specifications:,Intake duration: 220 Degrees,Exhaust duration: 220 Degrees,Intake lift: .498",Exhaust lift: .498",Lobe separation: 110 Degree,Intake Center Line: 110,Vacuum: 13"
List 1
PRODUCT NOTES:
Advertised Exhaust Duration - 282
Advertised Intake Duration - 282
Cam Type - Roller
CARB Executive Order Number - D-215-14
Computer Controlled Compatible - Yes
Exhaust Duration at .050 inch Lift - 220
Exhaust Valve Lift with Factory Rocker Arm Ratio - 0.498
Exhaust Valve Lift - 0.311
Intake Duration at .050 Inch Lift - 220
Intake Valve Lift with Factory Rocker Arm Ratio - 0.498
Lethal Performance is proud to offer the entire line of products!
