Edelbrock Performer-Plus Camshaft Kit - 2172
Edelbrock part #2172 Performer-Plus camshaft is designed for small-block Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder heads on a 400 engine.
Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. 'Proven performance' is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quality. Edelbrock core products are engineered, manufactured, and tested in the USA to ensure the best quality possible. This is further backed by some of the best warranties in the industry and a highly qualified technical support staff.
Edelbrock part #2172 Performer-Plus camshaft is designed for Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder heads on a 400 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions., Camshaft Specifications:,Duration @ .050 Intake: 204 degrees ,Duration @ .050 Exhaust: 214 degrees,Lift @ Valve Intake: .484",Lift @ Valve Exhaust: .510",Lobe Separation: 112 Degrees,Intake Centerline: 107 Degrees,Idle Vacuum @ 1000 RPM's: 14"
List 1
PRODUCT NOTES:
Advertised Exhaust Duration - 292
Advertised Intake Duration - 282
Cam Type - Cast
Computer Controlled Compatible - No
Exhaust Duration at .050 inch Lift - 214
Exhaust Valve Lift - 0.510
Grade Type - PERFORMANCE
Intake Duration .050 Inch Lift - 204
Intake Valve Lift - 0.484
Lifter Materials - Hardened Steel
Lethal Performance is proud to offer the entire line of products!
