FeaturesAdds RGBW color-changing ability to your engine bay area.Highly flexible waterproof LED strips.High-density LEDs for brighter output.Barrel-style M8 connectors for secure connection. OverviewMulticolor. Add RGBW color-changing ability to your vehicle with our Multicolor Engine Bay LED Strip Kit! This product is not just RGB it is RGBW! That means there is an extra integrated LED chip that is specifically white in color right next to the standard red green and blue LEDs. This provides a much more uniform pure and bright white color than the traditional method of combining all RGB signals. With our multicolor LED strips installed the possibilities are endless!Control. The included Bluetooth Controller will allow you to choose any color under the sun including True White directly from your phone and allow you to adjust the brightness of the LED strips. Any time you power up your strips they will default to the last color that was previously selected.Cut to size. These LED strips are flexible IP67 weatherproof SMD-type LED strips with 3 SMDs per 5 cm. They are cuttable every 3 chips to size to your need and come with 3M adhesive backing. Due to the weatherproofing cut portions cannot be reattached without manual soldering which removes the weatherproofing properties. Weatherproofing can be reapplied through waterproofing products.Installation. This kit includes everything you need to install LED Strips in the engine bay of your vehicle. You can install the kit using either the included door pin switch or toggle switch. This kit is very universal in nature and can be tapped into any 12V power source that you would like when installing. You will want to tap into any wire that is acting as a ground or you can go to a chassis ground!
