Acme Splitter: H1M > H1F / 9006F (Universal) - H410
Plug-N-Play: Forget about crimp-on wire taps, these convenient "Y" pigtails make splitting or doubling the signals from your headlight system easy and clean.
Double High Beams: So you already have a halogen high beam? When retrofitting a bi-xenon projector; you can harness the stock high beam power to activate the bi-xenon solenoid at the same time, thus doubling your high beam output.
Quad Retrofits: Use a splitter to run two low beam harnesses in parallel for four ballasts and then activate two pairs of bi-xenon solenoids off a single high beam output. Three total splitters needed.
Sport Bikes Retrofits: Instead of a single low beam and a single high beam, you can retrofit two bi-xenon projectors and split the single high beam output into both projector solenoids. Instant dual low beam dual high beam setup! (generally H7 Male to 9006/9006 female)
All Fitments: For the input, make sure to select the size that matches with your stock high beam bulb type. The output will generally be the female version of that same bulb, coupled with a 9006 to plug into your bi-xenon projector solenoid.
Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that our shop carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? contact us today!
MAX LOAD:::10A @ 12V DC|WIRE THICKNESS:::18 AWG|LENGTH:::Approx. 210mm|INSULATION:::Braided TechFlex
QUANTITY:::ONE Splitter (Order 2x for a Pair)|HIGH BEAM SPLITTERS:::Size dependent on selection|WARRANTY:::2 Years
Lethal Performance is proud to offer the entire line of products!
