Article Contents:
To maximize your F-150’s power potential, start by swapping the stock air intake for a high-flow cold air intake. This simple upgrade increases airflow, reduces restriction, and helps your engine breathe cooler, denser air for noticeable gains in horsepower and throttle response.
You’ll feel crisper acceleration, hear a deeper induction sound, and set the foundation for future performance mods—exactly what your Ford F-150 needs to wake up.
Bolt-on intake engineered by Whipple’s supercharger team — cooler air, sharper throttle response, refined V8 tone. No tune needed.
High-efficiency airflow and quicker response in under an hour. No calibration required for your 5.0L F-150.
Reusable oiled filter, smoked lid, and easy install. Designed to outflow stock and improve efficiency.
Sealed one-piece box with sight window and washable filter. Fewer parts, fast install, consistent gains.
A great upgrade for your F-150 build is a new aftermarket exhaust system. The factory exhaust is built to keep things quiet and meet emissions standards — not to unleash the full sound and performance potential of your truck.
But if you want to make a statement every time you hit the throttle, it’s time to ditch those stock pipes and let your F-150 breathe. Check out the video to see our overview and sound clips of the AWE 0FG 3" Dual Side Exit Catback Exhaust on our F-150.
Refined Touring sound with dual side exit and 4" polished tips. T304 stainless construction for a bolt-on, drone-free upgrade.
Aggressive RSC tone with a resonator delete and dual rear black tips. 3" 304 stainless for lasting performance and easy fit.
3" to dual 2.5" stainless with resonators, oval muffler, and 4" black tips. Handcrafted tone and straightforward installation.
Pre-axle 3" to dual 2.5" system in T304 stainless with a street profile. Mandrel-bent tubing for freer flow and easy fitment.
To unleash your F-150’s full power potential, you'll want to upgrade the factory exhaust manifolds to a set of high-performance headers. This swap improves exhaust flow, reduces backpressure, and lets your engine exhale more efficiently — boosting horsepower, torque, and throttle response.
You’ll notice stronger mid-range pull, a deeper, more aggressive exhaust note, and smoother acceleration throughout the RPM range. Check out the video to see our overview, install, and sound clips of the Kooks 1 7/8" long tube headers on our Lethal F-150.
1-7/8" long tubes with high-flow catted Y-pipe for proven gains and classic Kooks sound. Precision TIG-welded stainless construction.
Equal-length primaries and connection pipes maximize flow and tone. 304 stainless with Titan™ finish for durable, race-ready performance.
High-flow cats and X-pipe deliver power and an assertive note. 304 stainless, TIG-welded in the USA with a lifetime warranty.
To unlock your F-150 5.0’s true potential, upgrade to a custom tune that recalibrates the factory ECU for more power, sharper throttle response, and smoother shifting; paired with mods like a cold air intake or long-tube headers, it delivers stronger acceleration, broader torque, and refined drivability every time you hit the throttle.
Bluetooth RTD4 plus Lund calibration for sharper throttle, smoother shifts, and reliable power. Easy mobile flashing with 91/93 options.
Trusted PBD calibration with wireless RTD4 for smooth power and drivability. Simple setup, fast logs, and proven 5.0L results.
OEM-like calibration paired with RTD4 for crisp shifts and responsive torque. Seamless wireless flashing and clear datalog support.
To unleash next-level performance from your F-150 5.0, equip it with a supercharger. This forced-induction upgrade delivers massive horsepower and torque gains by forcing more air into the engine for explosive acceleration and instant throttle response.
Combined with supporting mods like headers and a custom tune, a supercharger transforms your truck into a true powerhouse with relentless pull, smooth power delivery, and the unmistakable whine that every enthusiast loves. Check out the video to see real world results from our Whipple Supercharged F-150.
Delivers up to 805 HP and 685 TQ with Whipple’s Gen 6 twin-screw design, dual-pass intercoolers, and OEM-fit installation for instant, reliable boost.
Produces 705 HP and 635 TQ with a 2.65L head unit, larger intercooler, full drive-mode retention, and factory-backed 3-year/36,000-mile warranty.
Centrifugal boost with 8-rib drive, massive air-to-air intercooler, and smooth powerband — durable, efficient, and ideal for towing or daily driving.
V-3 Si-Trim system adds 8–10 PSI for up to 606 HP and 596 TQ, featuring air-to-air cooling, billet mounts, and simple bolt-on installation.
To keep up with serious horsepower builds, upgrading your F-150’s fuel system is essential. A high-performance setup replaces restrictive factory components with precision-engineered hardware that ensures consistent, reliable fuel delivery under extreme demand.
Modern billet aluminum fuel systems eliminate the messy network of hoses, clamps, and fittings, using CNC-machined manifolds and O-ring seals for a clean, leak-free installation. Designed to support high-flow pumps and E85 compatibility, these systems provide the durability and flow capacity needed for boosted or high-output applications.
Dual Walbro 465s with lines, regulator, and wiring for boosted builds. Supports big power on E85 while keeping installation clean.
Made-to-order dual-pump module retains EVAP and siphon systems. Plug-and-play fit with PCM control and strong E85 capability.
CNC-machined 6061 billet hat with Viton seals for leak-free flow. E85 ready and configurable for dual or triple TI pumps.
To take your F-150’s performance and handling to the next level, a high-quality lowering kit is a must. By dropping the truck’s center of gravity, you’ll experience sharper cornering, improved stability, and a more controlled ride at higher speeds.
Whether you’re building a street-performance F-150 or just want a more aggressive stance, a properly tuned lowering kit delivers enhanced road feel, reduced body roll, and the sleek, planted look every performance truck deserves. Check out the video to see us showcase the VA Specialties street kit on our F-150.
Viking double-adjustable coilovers and Fox 2.0 shocks deliver control and comfort. 100% bolt-on kit with mounts, flip kit, and hardware.
Adjustable coilovers, HQ shocks, and tubular arms drop stance and sharpen handling. USA-made system that installs with basic tools.
Engineered for single-cab 2WD trucks with a true 3/5 drop. Includes brackets and hardware for proper geometry and factory-like ride.
Up to 3"/5.5" of drop with tuned coils, shackles, and spacers. Clean stance and predictable handling with OEM-grade fitment.
For our drag racers, consider pairing your lowering kit with a traction bar. And for our off-road guys, check out our lift kits or leveling kits.
Aesthetic mods let you customize your F-150’s appearance to match your personal style. From aggressive hoods and sleek spoilers to subtle trim upgrades, these enhancements transform your truck’s look without sacrificing function.
Whether you’re aiming for a sporty, street-ready stance or a clean, show-quality finish, aesthetic mods add personality, improve aerodynamics, and make your F-150 stand out from the crowd. Check out the video here to watch us install a Cervinis 3" Cowl Hood on our F-150.
Upgrade your F-150’s style and performance with a bold cowl or ram-air hood. These hoods enhance airflow, reduce heat, and deliver that aggressive, race-inspired look every truck deserves.
Transform your F-150’s look and visibility with premium lighting upgrades. From projector headlights to LED taillights, these kits deliver sharper illumination, modern styling, and enhanced safety—perfect for daily driving or show-ready builds.
Give your F-150 a sharper, more dynamic look with a front splitter. Designed for seamless fit and visual impact, these upgrades add a sporty, lower stance that instantly enhances your truck’s front-end appearance.
Enhance your F-150’s rear profile with a stylish spoiler upgrade. Designed to complement the truck’s lines, these spoilers add a sleek, sporty touch that elevates your look without sacrificing factory fit or finish.
Enhance your F-150’s look and performance with a premium wheel upgrade. From lightweight alloys to rugged off-road designs, these sets deliver sharper handling, improved durability, and the bold stance your truck deserves.
Color-matched parts can give your trim and mirror caps a clean OEM+ finish. Tie your exterior together with a seamless look that pairs perfectly with painted grilles, bumpers, and body-color accents.
Swap your stock grille for bold styling and weight savings. A new grille refreshes the front end with attitude while maintaining factory fit.
Upgrade to sleek performance bumper and save weight. A new bumper while give your front end a new look.
There's no better time to mod your F-150 than right now. Shop our Black Friday deals at Lethal Performance and get the parts your truck deserves today.
Shop F-150 Black Friday Deals
