The DivisionX Box is a universal wiring solution for return style fuel systems running up to three fuel pumps.
The Box allows you to run 3 pumps at all time or staged with a Hobbs / Pressure switch.
Relays are rated at 50 amps (typical fuel pump relays are rated 30 to 40 amps)
Circuitry uses "Plug And Play" design.
Three integrated 30 amp replaceable fuses.
Status LEDs on relay OUTPUTS. Inline 80amp Fuse for main power wire to controller
Run one, two or three fuel pumps full time or with remaining pumps activated on demand with an external hobbs/pressure switch
4 Gauge Main Power Wire
12 Gauge wiring from Controller Box to Pumps
OEM 6 Pin Connector for Plug and Play compatibility with all DivisionX Fuel Hats
Fuel pump trigger system works with switched 12V+ on/off (9V+ minimum) High Current APP connectors for main power and ground to controller
Positive trigger inputs using plug-in miniature connection: 10 to 16 VDC:
1- powers pump 1
2- powers pumps 2 and 3
Integrated SB connector rated at 50 amps
Individual fuel pump output connectors for each relay.
Division X The Box Fuel Pump Controller
15ft 4 AWG Power / Ground Wire
4 AWG Ring Terminals
7ft 12 AWG for 3 Fuel Pumps with Plug and Play Connector
In-Line Fuse Holder with 80amp Fuse (Main Power to Controller)
15ft Wiring Harness for Pump Trigger / Hobbs / Pressure Switch