UMI Performance 1978-1988 GM G-Body 12-Bolt Swap Upper and Lower Control Arm Kit - 301519-R

UMI Performance 1978-1988 GM G-Body 12-Bolt Swap Upper and Lower Control Arm Kit - 301519-R

This kit includes both the upper and lower rear control arms designed to bolt a 1964-1972 GM A-Body 10-Bolt or 12-Bolt rear end into a 1978-1988 GM G-Body; this includes Monte Carlo, Malibu, El Camino, Regal, Grand National, Grand Prix and Cutlass. The upper control arms supplied with this kit are built at the correct angle to attach to the G-Body chassis as well as the A-Body rear end "ears". These control arms are a must any time this swap is being completed. Using factory upper control arms will cause drastic rear end bind and incorrect driveline angle, this leads to traction lose, vibrations and unsafe handling. The lower control arms are fixed length and center the rear end in the wheel wells, lower arms also feature grease-able Energy Suspension polyurethane bushings and reinforced sway bar holes. For more information on a specific item please visit each products specific link below- Adjustable Upper Control Arms- Item # 3019 Lower Control Arms- Item # 3015

UMI Performance bump steer kits relocate the outer tie rod pivot point which results in decreased toe change during wheel travel. Standard kits include sleeves, rod ends, jam nuts and high quality, direct fit tapered studs. Race kits require drilling of the spindle and include heavy duty 5/8 bolts. Race kits are recommended for autocross and road race applications while standard kits are indicated for street/strip use.