Whipple 15+ Mustang GT W175FF (2.9L) Stage 1 SC Kit / Intercooled / 10-11psi / Black


Manufacturer: Whipple

7395.00 $

Availability: In stock

Maximum number of characters: 20

* Required Fields

Free Shipping on this item!

Whipple 15+ Mustang GT W175FF (2.9L) Stage 1 SC Kit / Intercooled / 10-11psi / Black

*image is only a representation and may not be accurate

NOTE: Flare tool and Flight Control software now included STANDARD.

CARB Approved EO # D-231-45

If you want the most advanced, most powerful, most upgradeable and highest quality system available, then here it is! Whipple Superchargers has yet again set a new precedence for bolt-on power and industry leading durability.

Nobody puts more time and resources into the development then Whipple. The proof is in the product, more power per lb of boost than any other system. The key to making such incredible reliable power is in the Whipple unique twin screw supercharger, massive air-to-water intercooler, oversized Crusher air system and innovative PCM programming that keeps the power-train safe and secure. Whether you’re looking for a daily driver that needs a little more punch or you’re craving a tire-frying, rubber shredding street machine, the Whipple Supercharger systems delivers like no other SC system today. Power from tip in to redline, the new Whipple SC system makes incredible power across the entire rpm range while maintaining industry leading drive-ability.

With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM constantly monitors the engines torque output while monitoring many different parameters to keep the engine in it’s ideal parameters. If a parameter falls below specification, the PCM will lower boost and torque output until the problem can be cured. No other calibration in the field has such technology, giving the Whipple SC system unheralded performance and reliability.

Why front feed? We gained nearly 1.75" in intercooler core and plenum volume to maximize power and power robbing restrictions. Giving us the biggest ic core while also having the biggest area below the ic and the side of the sc. This results in significantly lower pumping losses and lower IAT's. Not only does it have a large plenum below and on the sides, the front feed also has significantly open surface area above the IC core giving lower pressure drop and more effective cooling. The center discharge again allows for less pressure drop and more uniform airflow over the core. Resulting in better distribution and better cooking capacity.

During airflow, every turn is a possible restriction, requiring inlet losses and lower supercharger efficiency. The front feed minimizes the inlet losses resulting in lower losses and higher supercharger efficiency.

The lightweight tapered stainless steel jackshaft is .75" lower than a front feed, which helped with the intercooler size. It also allows torsional twist, helping belt systems and other components from the typical reciprocating mass issues.

Each system comes with a heavy duty spring loaded tensioner and adjustable idler system for multiple belt and pulley options. Also available is a 10-rib belt system using a ATI balancer. Systems are easily upgradeable. Because the supercharger is bigger, the sc uses larger sc pulleys for the same boost as others, resulting in better belt contact area and less belt slip.

The S550 now also features a heat exchanger that is 60% larger than previous generations, standard with every kit. Also available is the dual spal 11" electric fan kit. Each system also comes with an oversized ic reservoir, again significantly ahead of the competition. Holding nearly 1.3 gallons of liquid in just the reservoir alone! Nearly double any others. Big heat exchanger, big reservoir, dual fans equal bigger power gains, more consistent power and light years ahead of the competition. No need to spend. Thousands upgrading budget systems, get it all as standard with every kit.

No other upgrades required, just massive power right out of the box
Front entry W175ax (2.9 liters) Whipple twin-screw supercharger that significantly outperforms competitions 1.9L and 2.3L roots-type systems
Front feed supercharger utilizes precision ground helical cut gears vs a problematic belt.
Integrated casting to minimize bolt on pieces, adapters, leaks and flow restrictions
Integrated Crusher™ venturi shaped inlet for maximum airflow capacity and minimal rotor cavitation
Front feed allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available, nothing comes close
Massive oversized aluminum intercooler reservoir (over 2 gallons) holds more than double any competitors IC water system allowing longer more consistent power
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions
Exclusive 3x5 rotor combo for significant increase in airflow under the curve than less efficient 4x6 rotor combo or 4x4 roots
Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge
W175ax SC bottom is open for increased plenum volume and better over-intercooler air distribution giving more intercooler effectiveness
Discharge down design allows for less pressure loss which gives more power at lower boost levels
Top mount design allows for cooler operation then upside down SC's that conduct heat from engine and are trapped by runners and covers, causing hotter manifold temps and less power per pound of boost
More boost at the "hit" than any other twin-screw
Flat torque curve for incredible acceleration
Oversized heat exchanger for incredible intercooler water temps
Fits under factory hood with no modifications
No internal modifications required
Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters
Kits come complete with all necessary parts and hardware for installation
Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
Plug and play wiring with male and female connections
Proven 6-rib belt system with adjustable idler system
Optional 10-rib belt system with matching billet pulleys
Stainless steel tapered jack-shaft with unique plastic cover (or optional carbon fiber) for increased safety
OEM quick connect fittings for easy installation, no ugly brass or steel fittings on the SC
Complete kits and Tuner kits are available
Available in wrinkle black, polish, Ford textured blue or any custom color
Easily upgradeable with big cold air intakes and bigger throttle bodies (98mm round or 140mm elliptical)
Instant boost at the touch of the throttle
3 minute pulley changes
Lightweight pocketed SC pulley
1 year limited warranty
Optional 3yr/36k mile warranty (Covers $5000.00 of ENGINE damage only. Does not cover the transmission or drivetrain. Must be installed by a Whipple installing dealer or ASE certified mechanic.)
Manufacturer Whipple
Free Shipping Yes

Customer Reviews

Greart Product Review by Joshua w/ Express Oil Change and Tire Engineers, University Blvd Mobile Al
Nothing to say but its a great product. whipples instructions made this an easy install with minimal problems. the tune they sent was also just as easy to install. we did this job for a customer and he was extremely happy with the finished product. i will reccommend this to anyone. (Posted on 1/9/17)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

  • Mustang GT 5.0L 2015,2016,2017