*All images are for illustration purpose only. Actual product may vary
 WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. THE SALE, USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3))
VMP Tuning
SKU : VMP-SH34CG3R-P3

VMP Gen3R TVS Supercharger Upgrade with 87mm Intercooler Core & Monoblade Throttle Body for Terminators (2003-2004 Mustang Cobra) - VMP-SH34CG3R-P3

$6,699.00
Quantity
Mustang performance parts, performance and tuning
OR
free shipping on this item
Customer Reviews

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles.

Purchasing this product requires you to sign our Vehicle Compliance Waiver HERE

Description

Details

VMP Gen3R Package 3 for '03-'04 Cobra - VMP Monoblade TB & 87mm Core


Includes:

VMP Gen3R cobra supercharger with GT500 style elbow (call if you need Accufab or Stock style)

VMP/ PWR 87 mm intercooler core

VMP GT500 Monoblade Mechanical Linkage Throttle Body for 2003-2004 Cobra

Must purchase separately:

Supercharger pulley

Adapter tubes for stock water manifold VMP-SUC030 or 1in manifold VMP-SUC061

Cold Air Intake


The VMP Gen 3R 2.65L TVS Supercharger upgrade is a direct replacement for the factory Eaton M112 Supercharger on the 2003-2004 "Terminator" Mustang Cobra. It was designed from OEM CAD data to fit perfectly and clear the stock hood. Some clearancing of the coolant crossover tube is required. It is a one piece housing with a side inlet like the factory supercharger. The one piece design makes for a very rigid housing, allows for a larger rear inlet, decreases the chance of vacuum leaks, and makes installation easier.

With the VMP TVS you get the reliability of an Eaton blower and the performance of the TVS rotorpack design. The Twin-Vortices-Series compressor has proven itself to be highly efficient over a wide operating range of 10-22+psi. It is a high twist symetrical 4-lobe rotor design with excellent adiabatic efficiency. TVS technology is used on the 2013-2014 GT500, ZR1 Corvette, and ZL1 Camaro.

VMP 2.65L TVS Supercharger upgrade key features:

Direct replacement for stock supercharger

Gains of 100-550+ RWHP depending on pulley size & boost level

1 year warranty provided by VMP

Proven Eaton reliability: 100,000 mile service interval

Pre-filled with oil

Intercooler bolts directly to bottom of blower

Side inlet for easy access to fuel rails

Side inlet allows use of different throttle body styles

Vacuum line connections and T-MAP in factory locations

Large 45MM bypass-valve for cooler operation, improved driveably, and greater fuel efficiency

EGR provisions built into the casting, block off plate provided as well

Pulleys are easily bolted on and off using six allen head bolts

Installation:

The factory supercharger to lower intake manifold gasket is metal and can be re-used in most cases

The factory IAC gasket may be re-used in most cases

The TB gasket may be re-used in most cases, aftermarket TBs usually include a new gasket

EGR Option available

Click here to download VMP 03-04 Cobra TVS Instructions (Rev 3.1.15)

Boost levels:

SC Pulley Stock Crank 4lb Lower

3.3" 18 psi 22 psi

3.2" 19 psi 23 psi

3.0" 21 psi stroker or cammed motors only

2.8" 23 psi stroker or cammed motors only

2.6" 25 psi stroker or cammed motors only

If you plan to aim for higher horsepower numbers, we recommend the following upgrades:

- Return style fuel system

- 95 lb/hr or 1000cc fuel injectors (Fuel Injector Clinic, DeatchWerks, Injector Dynamics)

The VMP TVS places the SC pulley in the same location as the stock blower.

The VMP TVS was designed with a HUGE inlet, the throttle body you choose to run with the blower will ultimately determine how much air you can get into the blower and how well it performs. We support all major throttle body styles including a custom GT500 bolt-pattern single blade throttle body. If you don't have an upgraded throttle body already you may order one from us, make sure you select the correct elbow style to match up with the Idle Air Control valve.

The VMP TVS accepts all factory hardware

The VMP TVS deletes the boost dump solenoid and EGR mounting bracket for a cleaner look and larger inlet.

The VMP TVS uses a removeable inlet elbow for easy fuel rail access and compatibility with many styles of throttle bodies

The VMP TVS has all of the factory vacuum connections and T-MAP mounting pad on the rear

The VMP TVS has a one-piece housing with integral intercooler mounting flange and 45mm bypass

A factory style bypass valve actuator is located directly on the blower.

The VMP TVS uses an o-ring on the inlet elbow for easy installation and servicing.

The VMP TVS has a Monster inlet as standard equipment.

The elbow on the VMP TVS has the two bottom holes slotted to faciliate easier installation and removal.

Several elbows are available for the VMP TVS to support the Dragon, stock 57mm, BBK 65mm, Accufab, LFP, Billetflow, and GT500 bolt-pattern throttle bodies

Dragon requires an IAC mount (included), the others use an round or slotted IAC passage like stock.

Vehicle Application(s)

This product fits the following models and years

ModelYear(s)
SVT Cobra2003 2004
Reviews

Write Your Own Review

Q&A
Recently viewed products