Details
Strange Engineering 9" Ultra Fab Housing for 2005+ Mustang and Cobra Jet.
NO ends WITH mounts
Ultra Fabricated housing centers are constructed from .125” alloy steel with a heavy duty .375” face plate. Triangulated design provides rigid housing tube support for more consistent and straighter launches. Internal radial gusset plates brace end of housing tube and increase overall housing stiffness. Tube insertion locations are slotted for 5” to allow complete and secure welding of the tubes to the housing. The housing is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9”, 9 1/2”, or 10” gear sets
The housing is fitted with fill and drain plugs, tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing, and choice of mounts. Larger tubing is stronger, but many mounts are designed to fit a 3” tube. A builder might order this if they are unsure of the final width, or already has housing ends and an alignment jig. It may also be the base for a housing that will use a floater kit.
Includes: 3 1/4 OD tubes, fill & drain, and upper control arm mounts.
Housing ends are NOT INCLUDED
