Details
Strange Engineering 9" Ultra Fab Housing for 2005+ Mustang and Cobra Jet.
Includes ends NO mounts
Ultra Fabricated housing centers are constructed from .125” alloy steel with a heavy duty .375” face plate. Triangulated design provides rigid housing tube support for more consistent and straighter launches. Internal radial gusset plates brace end of housing tube and increase overall housing stiffness. Tube insertion locations are slotted for 5” to allow complete and secure welding of the tubes to the housing. The housing is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9”, 9 1/2”, or 10” gear sets
The housing is fitted with fill and drain plugs, tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing, and choice of housing ends. Larger tubing is stronger, but your intended mounts may dictate tube diameter. Since the builder will be installing their own mounts, extreme care must be taken during the welding process as housing end alignment can be compromised. An alignment jig should be used afterwards to ensure that warping did not occur.
Includes: 3 1/4 OD tubes, fill & drain, and upper control arm mounts and late big ford ends.
Lower control arm and Shock/Sway bar brackets NOT INCLUDED