Details
Strange Engineering 9" Ultra Fab Housing for 2005+ Mustang and Cobra Jet.
NO ends or mounts
Ultra Fabricated housing centers are constructed from .125” alloy steel with a heavy duty .375” face plate. Triangulated design provides rigid housing tube support for more consistent and straighter launches. Internal radial gusset plates brace end of housing tube and increase overall housing stiffness. Tube insertion locations are slotted for 5” to allow complete and secure welding of the tubes to the housing. The housing is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9”, 9 1/2”, or 10” gear sets
The housing is fitted with fill and drain plugs, and tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing. Larger tubing is stronger, but your intended mounts may dictate tube diameter. The purpose for purchasing a housing like this, is for the builder that will be installing their own mounts and may also trim the tubing further. A welding jig will be required to install the housing ends after all other welding has been completed.
Includes: 3 1/4 OD tubes, fill & drain, and upper control arm mounts only.
Lower control arm and Shock/Sway bar brackets, and housing ends NOT INCLUDED.
