Details
Strange Engineering 9" Heavy Duty Housing for 2005+ Mustang and Cobra Jet. The purpose for purchasing a housing like this, is for the builder that will be installing their own mounts and may also trim the tubing further.
No ends or mounts. Sold Separately
Heavy duty housing centers are constructed from .141” mild steel with a heavy duty .282” face plate. Tube insertion locations are slotted to allow complete and secure welding of the tubes to the housing. Internal plates gusset the housing and provide internal support to the ends of the tubes. The cover is designed to provide the clearance necessary for cases with heavy duty main caps and also allowing the use of 9 1/2” gear sets.
The housing is fitted with fill and drain plugs, and tubed with your choice of .250” wall 3” or 3 1/4” mild steel tubing. Larger tubing is stronger, but your intended mounts may dictate tube diameter. A welding jig will be required to install the housing ends after all other welding has been completed.
Includes: 3 1/4 OD tubes, fill & drain, and upper control arm mounts only.
Lower control arm , Shock/Sway bar brackets, and housing ends are NOT INCLUDED
