My Cart

You have no items in your shopping cart.

Buy with monthly payments

Get a real-time decision.

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Watson Racing 2005-2017 Coyote Cam Actuator Delete Plugs
    $109.00
    These plugs are needed when running aftermarket ECU and stand-alone electronics (FAST, AEM, Holley, Haltech, Big Stuff) and deleting VCT (Variable Cam Timing).

    Simple press in fit. Available in our smoke grey anodized finish. Set of 4. Learn More
  2. Watson Racing 2010-2014 Mustang PCM Support Bracket
    $21.00
    As used on our factory built drag race and road race Mustangs! The Watson Racing PCM Support Bracket maintains the use and location of the factory PCM bracket, and attaches to the body using factory mounting holes. Ideal when using a Ford Racing control pack or relocated Bussed Electrical Center (BEC). Laser-cut, lightweight, and powder coated. Save yourself from headaches and a lot of fabrication time with this simple, bolt-on bracket. Learn More
  3. Watson Racing 2005-2014 Mustang TH400 Transmission Mount
    $195.00
    Watson Racing's Mustang 2005-2014 Mustang TH400 Transmission Mount and Crossmember! When it comes time to step up to the Turbo 400 for high-power applications for the S197, we make the installation easy with our rigid one-piece transmission mount. The Watson crossmember is constructed of heavy duty 1/4-inch (6-mm) thick steel and zinc plated for long life – far better protection than powder coating which may chip off over time. Kit includes a TH400 rubber isolator/mount, and bolts in place of the stock transmission crossmember using your OEM bolts. Learn More
  4. Watson Racing 2010-2014 Mustang Drag Race Mirror Block Off
    $155.00
    Service replacement part for the (2010-2014) Mustang factory build drag race car
    Designed to fill void left when removing side mirrors for race car application
    Fits (2010-2014) Mustang
    For OFF ROAD USE ONLY
    Learn More
  5. Watson Racing 2005-2014 Mustang Drag Race Parachute Bumper
    $325.00
    Standard on our factory built 2014 Drag race cars! Perfect for your 2013 and older Drag Car, or serious Mustang drag car. Designed and developed in conjunction with Ford Performance Racing engineers, this is likely the most track-tested and validated parachute bumper on the planet. Constructed of 4130 chromoly, fully TIG welded, and powder coated black. Designed with the option of adding 4th bolt on each end for added strength (factory bumper only has 3 bolts), which is standard practice for our ’14 factory-built drag car. Places chute receiver through the license plate area for a clean appearance and little modification to the fascia. Originally designed for 2010+ Mustangs, but will fit 2005-2009 as well (hole location may change). Perfect companion with the Watson Racing Chute Mount, part number WR-PARACHUTEMNT AVAILABLE NOW! Learn More
  6. Watson Racing 2005-2014 Mustang Drag Race Wheelie Bar
    $1,395.00
    Designed and developed alongside Ford Racing for the 2014 Factory Built drag race program! For the serious Mustang drag racer, the Watson Racing wheelie bar is designed to work with 9-inch rear axles only. The kit includes brackets that have to be welded to your axle housing, as well as a small sheet metal notch that must be welded into the spare tire well, for wheelie bar clearance. Will work with any 2005-2014 Mustang -possibly other years as well- using a 9-inch rear axle. Constructed of CNC mandrel bent 4130 chromoly tubing, precision TIG welded in fixtures, and powder coated, all right here in Michigan. The Watson Wheelie Bar is a product of months of extensive testing and dozens upon dozens of passes down the track- no shortcuts taken here. Contact us if you’d like us to weld the brackets to your axle housing. Learn More
  7. Watson Racing 2013-2014 Mustang Drag Race Line Lock and Bracket
    $75.00
    Drag Race line lock and bracket
    Mustang (2013-14) to be used with WR-Brake Line Kit [ WR-DRBRKLNS ]

    Also recommended to be used with Drag Race Master Cylinder Bracket [ WR-DRMSTRCYLBRC ] (Strange Master Cylinder) Learn More
  8. Watson Racing 2005-2014 Mustang Drag Race Stainless Steel Hard Fuel Lines
    $395.00
    Another one-of-a-kind part from Watson Racing! We are proud to release our premium stainless steel hard fuel lines for 2005-2014 Mustang drag race applications. Developed for and used in the factory built drag cars, these high-flowing lines measure 1/2-in. diameter and will support up to 1,500 horsepower! Precision CNC mandrel-bent for an exact fit every time, and made of stainless steel to last a lifetime. Why mess with flexible braided lines that require dozens of p-clamps and zip ties to hold in place? Assembled with TIG-welded –AN fittings, no hose clamps required here! Designed for a return-style fuel system. The lines enter the engine bay on the passenger side under the factory battery location (circled in red). At the rear of the car, the fuel lines install through the side of the spare tire well, allowing easy connection to a trunk-mounted fuel cell. PLEASE NOTE- this part number includes the hard fuel lines ONLY. Shown in the pictures are numerous other items that are available separately (aluminum separators/clamps, fuel filter, etc). The Watson Racing hard fuel lines are typically installed with an Aeromotive Chassis Kit designed specifically for these lines. Though it is not required, the Chassis Kit includes the fuel filter, regulator, fuel sample valve, black aluminum fuel line mounting clamps/separators, and the soft lines that connect the hard fuel lines to the spare tire well-mounted Fuel Cell. Watson Racing can supply these Aeromotive parts; please call to ask for availability. The Aeromotive Chassis Kit is not required to install the Watson hard fuel lines. Since the hard fuel lines use –AN fittings, you are free to make your own soft lines to meet your specific requirements.

    Please see WR-FUELCELLBRKT for the Aeromotive fuel cell mounting bracket. Learn More
  9. Watson Racing 2005-2014 Mustang Drag Race Window Net Kit
    $100.00
    WINDOW NET KIT- MUSTANG DRAG RACE REQ.WR ROLL CAGE
    The Watson Racing Drag Race Window Net Kit is a great compliment to your Watson Drag Race cage kit! This high-quality, complete kit includes powder coated window net rods with a release buckle already installed, a heim joint/hinge for flexibility, and all the necessary tabs to weld this to your cage. Learn More

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4