Shelby 05-11 Mustang Caster Camber Plate Kit

These Shelby American camber/caster plates are designed to provide better performance and handling, especially in applications where the car has been lowered.  In applications where the car has been lowered, the top of the front tires tend to "lean in" towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with our caster/camber plates.

Applications:
2005-2010 Ford and Shelby Mustangs.

Specifications
Bolts on! No drilling or cutting required.
1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.
0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.
Caster and camber are easily adjusted at the top of the strut tower.
The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars.
Teflon® lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.
High-tech composite thrust bearing transfers the spring load into the strut tower.
All parts are either plated or powder coated for great looks and long lasting protection.
Lowered vehicles as much 2.5 inches can still be aligned to factory specifications.

Installation Instructions:
Click here to download in Adobe PDF.

Learn More

QA1 2011 Mustang Caster/Camber Plates

**THESE CC PLATES WILL ONLY WORK WITH QA1 FRONT STRUTS OR QA1 COILOVER KIT. THEY WILL NOT WORK WITH ANY OTHER STRUT INCLUDING THE STOCK ONES**

QA1 once again leads the industry by developing a specifically engineered asymmetric bearing for caster/camber plate applications. Through this innovative design, the bearing allows for improved load distribution that significantly reduces wear and increases durability eliminating "sloppy bearings" which result in road noise and poor handling characteristics.

QA1’s high quality caster/camber plates for race applications offer many features not found in other brands. For example, the bearing housing is tig-welded for the utmost in strength and durability. This kit provides caster and camber changes for the ultimate in adjustability.

Fitment: Will only work with QA1 front struts (part # H2004 or H 2011 ) and QA1 coil over kit (part # MU150, MU175, MU200, MU225 or MU250).

Learn More

Eibach 05-2013 Mustang Pro-Alignment Camber Bolts

 

Footnotes: Camber Bolts 14mm. Front - Camber +/-1.75 Degrees Of Adjustment.

PRO-ALIGNMENT Camber Bolt Kit

• Precision Alignment Camber Bolt Kit for Maximum Performance
• Prevents Uneven Tire Wear
• Wider Range of Camber Adjustment-Suitable for Street or Track Tuning
• One-Year Warranty

After the installation of either an Eibach PRO-KIT, SPORTLINE spring kit or PRO-STREET, R1, R2 coil-over kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear.

Eibach offers a complete range of PRO-ALIGNMENT kits, which provide a simple, affordable solution to correct excessive negative camber. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making an Eibach PRO-ALIGNMENT kit a necessity for the serious performance tuner.

For the extreme lowering of SPORTLINE and PRO-STREET-S, MULTI-PRO-R1/R2 coil-over applications, look for the alignment kits with a greater range of adjustment. These will be listed below the standard PRO-ALIGNMENT kit in the applications section.

Learn More

Correct front alignment and add camber adjustability to the your 2010-2014 S197 Mustang with Camber Bolts from BMR Suspension. The S197 Mustangs have no factory camber adjustability, and once your car is lowered, this can lead to poor handling and premature tire wear. BMR’s Camber Bolts are forged steel bolts, giving you unrivaled strength and precision. The assembly is completed with heavy-duty nuts and locating washers. The BMR Camber Bolts give you 2 degree of camber adjustability in the front of your S197 Mustang. This allows you to achieve the proper camber settings on lowered vehicles, or more aggressive alignment setting for hardcore handling applications.

BMR Suspension designed the FC001 Camber Bolts for street performance, drag race, and handling applications. Each component of the FC001 assembly is precision forged, giving you the ability to make precise alignment changes. The nut/locating washer design allows for unlimited adjustments without have to use new hardware. Whether you drag race, road race, or simply drive your car on the street, BMR’s FC001 is perfect for any car in need of additional front camber.

BMR Suspension’s FC001 camber bolts are available in a durable black zinc finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.

- Fits 2010-2014 S197 Mustang
- Provides 2 degrees of additional camber adjustability
- Allows for proper front alignment on lowered vehicles
- Allows for aggressive alignment settings for autocross and road race applications
- Heavy-duty Hardware for the ultimate in strength
- Heavy-duty nut and locating washer
- Simple bolt-on installation
- Durable black zinc finish
- Proudly designed in the U.S.A.
- Proudly built in the U.S.A.
Learn More

2005-2014 Mustang Caster/Camber Kit

Benefits
Eliminates flexible strut mount bushings
Allows adjustments to caster & camber
Increases high speed stability

Use of This Kit Will Resonate Noise
It is not recommended for street use

Features
• Zinc plated bearing plates
• Powder coated lower plates
• Teflon® lined bearings
• Steel bushings & spacers
• Zinc plated bolts, nuts, & washers Learn More

Steeda 05-10 HP Upper Strut Mounts - Street/Race - with camber adjustment - 555-8120

Steeda's heavy duty, direct replacement, upper strut mounts replace the weak factory mounts for S197 Mustangs.

The Steeda street heavy duty upper strut mounts are manufactured to the same exacting tolerances as our industry leading caster/camber plates. They utilize a roller bearing that exceeds OEM specs to ensure precise suspension control. Will not fail on lowered cars like the factory piece.

These upper mounts eliminate the "popping" sound that is common on lowered cars when the factory upper mount fails. Unlike the factory piece, you can also get an extra 1 degree of camber in each direction with these plates as well. Steeda's heavy duty upper mounts are specifically designed for street use and will not show any increase in NVH when installed. Price includes a set of two.

Patent Pending!

Read Steeda's blog post to learn more about the truth behind caster and camber products: https://www.steedablog.com/2012/08/the-truth-about-camber-caster-plates-and-strut-mounts/

Product Benefits

• Better handling with more stable cornering, while maintaining factory ride quality
• Precision Tolerance and Fit with the Highest Grade Materials available
• Allows adjustment of up to 1 degree positive or negative of camber

Learn More

Steeda Mustang Heavy Duty Upper Strut Mounts (11-14) - 555-8135

Steeda's Upper Strut Mounts for 2011+ Mustang have been tested on several popular race tracks to ensure increased suspension performance along with no increase in NVH. Manufactured from billet aluminum, billet steel, TIG-welded, nickel plated, and grade 12.9 hardware.

Comes with a fully caged 70mm diameter 7200lb capacity needle roller bearing for long life and incredible strength. Triple sealed to keep out dirt and water. Uses custom made polyurethane bushings to improve suspension compliance while keeping NVH at a minimum. Allows for +/- 1 degree of camber adjustment.

A great upgrade for anyone racing their car, running lowering springs, or wanting to rid their car of the popping sounds coming from worn factory and inferior aftermarket mounts.

Note: Does not fit model years before 2011. This kit is designed for 2011 and up Mustangs only.

Read Steeda's blog post to learn more about the truth behind caster and camber products: https://www.steedablog.com/2012/08/the-truth-about-camber-caster-plates-and-strut-mounts/

Read about what Billy Johnson, a professional racecar driver, has to say about the Steeda Heavy Duty Upper Strut Mount in his article on MotoIQ.

Product Benefits

• No suspension knockback caused by use of spherical bearings found in competitors mounts
• Precision Tolerance and Fit with the Highest Grade Materials available
• +/- 1 degree of camber adjustment

Learn More

Maximum Motorsports 05-09 Mustang Caster Camber Plates

Lowered Mustangs
Lowering your Mustang will cause the top of the front tires to lean in towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with the Maximum Motorsports Caster/Camber Plates. Even a Mustang lowered as much as 2.5 inches can still be aligned to factory specifications.

Bolts on! No drilling or cutting required.

1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.

0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.

Caster and camber are easily adjusted at the top of the strut tower.

The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars. Teflon lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.

High-tech composite thrust bearing transfers the spring load into the strut tower.

All parts are either plated or powder coated for great looks and long lasting protection.

Warranty: Maximum Motorsports Caster/Camber Plates part #Mm5CC-1 have a limited lifetime warranty against spherical bearing failure or plate failure. That's right - If you wear out the spherical bearing, or break the plates while driving, we will replace that component for free. This warranty applies to the original retail purchaser of genuine MM Caster/Camber Plates. Learn More