Drag race 6-point Mustang roll bar, with MM's exclusive easily-removable door bars, and a fixed harness mount tube welded in place. Fits 2005-2014 Mustang coupe.

Note the position when the door bar is removed

This Mustang Roll Bar:
6-point
E-Z-Remove door bars
Fixed harness mount tube
Meets NHRA and NMRA rules for drag racing
Does not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.
2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces.

Features
Each E-Z-Remove door bar is held in place with two bolts. Remove them and the door bar is gone in seconds.

Notes
Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.

Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Special-Order Option
Diagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3/4" diameter by 0.134" wall DOM tube.

To order a Diagonal Brace, select the "Diagonal Brace Option" checkbox before adding to your shopping cart:


We do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.
Learn More

MM-designed roll bar mounts for the S197 chassis replace the thin OEM B-pillar gussets with a very robust support bracket. This bracket is the perfect foundation for a custom roll cage. Using these brackets will greatly reduce fabrication time. These are the same brackets we include in all of our roll bars for 2005-2014 Mustangs. Meets the NHRA rules. Bolt-in or weld-in.Learn More

Kit to install easily-removable door bars on a previously-installed MM 4-point roll bar. MM's E-Z-Remove door bars can be detached and removed in moments.

Fits these previously installed MM 4-point roll bars:
Mm5RB-20.1
Mm5RB-20.2
Mm5RB-20.3

Benefits
Adds door bars to the MM 4-point roll bar already in your Mustang.
The standard door bars of the MM 6-point roll bars can be difficult and time-consuming to remove and reinstall. When removed, bolt holes in the floor are exposed.

After retrofitting to the E-Z-Remove door bars, both door bars can be easily removed in just a couple of minutes, and there are no holes left exposed in the floor.

Leave the E-Z-Remove door bars out for daily driving.
When heading to the track, reinstall them in moments.
Meets the NHRA and NMRA rules for removable door bars.

This kit includes:
(2) E-Z-Remove door bars
(2) floor mounts unique to the E-Z-Remove door bars
(2) floor-mount doubler plates
(2) mounting spuds for the main hoop
All hardware required

Notes
Welding is required. The two mounting spuds must be welded to the main hoop. No other welding is needed.
The Mm5RB-20.2 4-point roll bar will meet the NHRA/NMRA rules with the addition of the Mm5RBO-3 E-Z-Remove door bars.
E-Z-Remove door bars are available on new roll bars: Mm5RB-24, Mm5RB-24.5, Mm5RB-24.6
To upgrade your 6-point roll bar to E-Z-Remove door bars use Mm5RBO-2.
Read the Mm5RBO-3 door bar installation instructions before purchasing.
Learn More

Kit to install easily-removable door bars in place of the standard door bars originally fitted to MM 6-point roll bars. MM's E-Z-Remove door bars can be detached and removed in moments.

Fits these previously installed MM 6-point roll bars:
Mm5RB-20
Mm5RB-20.5
Mm5RB-20.6

Benefits
The standard door bars of the MM 6-point roll bars can be difficult and time-consuming to remove and reinstall. When removed, bolt holes in the floor are exposed.

After upgrading to the E-Z-Remove door bars, both door bars can be easily removed in just a couple of minutes, and there are no holes left exposed in the floor.

Leave the E-Z-Remove door bars out for daily driving.

When heading to the strip, reinstall them in moments.

Meets the NHRA and NMRA rules for removable door bars.

This kit includes:
(2) E-Z-Remove door bars
(2) floor mounts unique to the E-Z-Remove door bars
All hardware required

Notes
E-Z-Remove door bars are available on new roll bars: Mm5RB-24, Mm5RB-24.5, Mm5RB-24.6
To add E-Z-Remove door bars to your 4-point roll bar use Mm5RBO-3.
Read the Mm5RBO-2 door bar installation instructions before purchasing.
Learn More

Street 4-point Mustang roll bar, without door bars, without harness mount tube, for 2005-2014 Mustang coupes.

This Mustang Roll Bar:
4-point
NO door bars
NO harness mount tube
Does not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.
2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces.

Notes
Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.

Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Special-Order Option
Diagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3/4" diameter by 0.134" wall DOM tube.

To order a Diagonal Brace, select the "Diagonal Brace Option" checkbox before adding to your shopping cart.

We do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.Learn More

Sport 4-point Mustang roll bar, with removable harness mount tube, for 2005-2014 Mustang coupes.

This Mustang Roll Bar:
4-point
NO door bars
Removable harness mount tube bolts in place
Does not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.
2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces.

Notes
Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.
Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Special-Order Option
Diagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3/4" diameter by 0.134" wall DOM tube.

To order a Diagonal Brace, select the "Diagonal Brace Option" checkbox before adding to your shopping cart.

We do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.Learn More

Street and strip 6-point Mustang roll bar, with MM's exclusive easily-removable door bars, and no harness mount tube. Fits 2005-2014 Mustang coupe.

Note the position when the door bar is removed

This Mustang Roll Bar:
6-point
E-Z-Remove door bars
NO harness mount tube: You build your own
Does not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.
2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces.

Sport 4-point Mustang roll bar, with fixed harness mount tube welded in place, for 2005-2014 Mustang coupes.

This Mustang Roll Bar:
4-point
NO door bars
Fixed harness mount tube
Does not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.
2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces.

Notes
Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.

Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Special-Order Option
Diagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3/4" diameter by 0.134" wall DOM tube.

To order a Diagonal Brace, select the "Diagonal Brace Option" checkbox before adding to your shopping cart.

We do not stock roll bars with the special-order options. Allow 4-6 weeks for manufacturing.Learn More

Street and strip 6-point Mustang roll bar, with MM's exclusive easily-removable door bars, and no harness mount tube. Fits 2005-2014 Mustang coupe.

Note the position when the door bar is removed

This Mustang Roll Bar:
6-point
E-Z-Remove door bars
NO harness mount tube: You build your own
Does not fit Mustangs with the Glass Roof option because the headliner in those Mustangs is considerably lower and interferes with the main hoop.
2013 Note: Ford changed the interior plastic of the 2013 model year hardtop Mustangs. While all of the MM roll bars fit the 2013 models, we have not yet updated the installation instructions to show the new procedure required to trim the interior plastic around the rear braces.

Features
Each E-Z-Remove door bar is held in place with two bolts. Remove them and the door bar is gone in seconds.No harness mount tube. Allows you to custom build exactly what you want for your Mustang.

Notes√Does NOT meet NHRA or NMRA rules for drag racing. Any model roll bar that does not include high-mounted door bars and have a welded-in harness mount brace does not meet the NHRA or NMRA rules.

Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads. Click here for roll bar padding.

Special-Order Option
Diagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3/4" diameter by 0.134" wall DOM tube. Note that the diagonal brace is not removable.To order a Diagonal Brace, select the "Diagonal Brace Option" checkbox before adding to your shopping cart.

We do not stock roll bars with the special-order options. Allow 2-4 weeks for manufacturing.

Learn More