My Cart

You have no items in your shopping cart.

Buy with monthly payments

Get a real-time decision.

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2
  1. Lethal Performance Intake and Tune Power Pack - JLT Intake, Lund Tune, HPT RTD Tune Device (2011-2014 Shelby GT500)

    From: $995.60

    To: $1,355.64

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  2. Lethal Performance Intake and Tune Power Pack - PMAS Intake, Lund Tune, HPT RTD Tune Device (2011-2014 Shelby GT500)

    From: $903.36

    To: $1,215.90

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  3. Lethal Performance Intake, TB, Lower Pulley, and Plugs Power Package - PMAS, ATI, NGK, Palm Beach Dyno uCal with Tune (2011-2014 Shelby GT500)

    From: $2,385.30

    To: $3,264.96

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  4. Lethal Performance Intake, TB, Lower Pulley, and Plugs Power Package - JLT Intake, ATI Balancer, NGK Plugs, Palm Beach Dyno uCal with Tune (2011-2014 Shelby GT500)

    From: $2,707.94

    To: $3,564.91

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  5. Lethal Performance Intake, Throttle Body, and Tune Power Pack - JLT Intake, Throttle Body, Palm Beach Dyno uCal with Tune (2011-2014 Shelby GT500)

    From: $1,518.10

    To: $1,849.63

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  6. Lethal Performance Intake, Throttle Body, and Tune Power Pack - PMAS Intake, Palm Beach Dyno uCal with Tune (2011-2014 Shelby GT500)

    From: $1,425.86

    To: $2,042.39

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  7. Lethal Performance Intake and Tune Power Pack - PMAS Intake, Palm Beach Dyno uCal with Tune (2011-2014 Shelby GT500)

    From: $855.86

    To: $1,239.65

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  8. Lethal Performance Intake and Tune Power Pack - JLT Intake, Palm Beach Dyno uCal with Tune (2011-2014 Shelby GT500)

    From: $948.10

    To: $1,379.39

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More
  9. Lethal Performance Intake, Throttle Body, and Tune Power Pack - PMAS Intake, Lund Tune, HPT RTD Tune Device (2011-2014 Shelby GT500)

    From: $1,473.36

    To: $2,137.39

    JLT 2010-2014 Shelby GT500 123mm Plastic Big Air Intake Kit All new Textured Plastic BIG AIR CAI for the 2010-14 GT500When we developed this intake we did something completely different for us and incorporated the MAF housing into the tube. This made for a much smoother interior without any transitions, steps or couplers to upset the air flow. Another benefit is the over all look is just plain awesome!It’s a full 123mm ID at the MAF area and fits under the stock strut tower bar. It also has a new larger heat shield with two mounting points and a weather strip that seals to the hood. With a huge 5” opening on the tube we needed a huge filter. So we got with S&B and gave them some measurements. We love the tapered flange design and Powerstack filtered ends of their filters and ended up with a monster 5x9” filter, that’s a full 8.25” across at the base and 5.5” at the top.Finish it off with a silicone coupler and stainless clamps and you got the cheapest 123mm Intake on the market!!!Early testing shows this can be used with the stock MAF sensor all the way up to 750 RWHP and well beyond with a MAFia, SCT BA5000 or HPX sensor. Learn More

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2