As used on our factory built drag race cars! Laser-cut from quarter-inch thick steel plate, the Watson Racing Mustang K-Member Tie Down/Tow Ring kit is welded to your factory K-member providing ultra-strong tie down points as well as a central tow ring for pulling your car through the pits, or winching it into your trailer. No need for big bulky tow rings poking through your front bumper or grill!Learn More

Standard on our factory built 2014 Drag race cars! Perfect for your 2013 and older Drag Car, or serious Mustang drag car. Designed and developed in conjunction with Ford Performance Racing engineers, this is likely the most track-tested and validated parachute bumper on the planet. Constructed of 4130 chromoly, fully TIG welded, and powder coated black. Designed with the option of adding 4th bolt on each end for added strength (factory bumper only has 3 bolts), which is standard practice for our ’14 factory-built drag car. Places chute receiver through the license plate area for a clean appearance and little modification to the fascia. Originally designed for 2010+ Mustangs, but will fit 2005-2009 as well (hole location may change). Perfect companion with the Watson Racing Chute Mount, part number WR-PARACHUTEMNT AVAILABLE NOW!Learn More

The Watson Racing Battery Kill Switch Mounting Kit is a great way to take the guesswork and fabricating out of mounting your battery disconnect switch, which is required for most every racing sanctioning body. Specific to the 2005-2014 S197 Mustangs, this kit has been tried and tested in the production Drag Race cars! The kit includes a powder coated bracket that mounts the switch of your choice (not included) in a convenient, out-of-the-way location on the passenger side of the trunk. A push/pull lever kit for easy operation through the rear quarter panel is not included.

Learn More

OEM reliability designed for your drag car! Standard on our 2014 factory built drag race cars, our transmission cooler is track-proven with -AN fittings and a laser-cut, powder coated bracket for long-life and leak-free operation. Designed to be used without an air conditioning condenser, but could be modified to work with. Because you can use this with just about any transmission, the cooler lines are not included, as each application could be different.Learn More

WINDOW NET KIT- MUSTANG DRAG RACE REQ.WR ROLL CAGE
The Watson Racing Drag Race Window Net Kit is a great compliment to your Watson Drag Race cage kit! This high-quality, complete kit includes powder coated window net rods with a release buckle already installed, a heim joint/hinge for flexibility, and all the necessary tabs to weld this to your cage.Learn More

Another one-of-a-kind part from Watson Racing! We are proud to release our premium stainless steel hard fuel lines for 2005-2014 Mustang drag race applications. Developed for and used in the factory built drag cars, these high-flowing lines measure 1/2-in. diameter and will support up to 1,500 horsepower! Precision CNC mandrel-bent for an exact fit every time, and made of stainless steel to last a lifetime. Why mess with flexible braided lines that require dozens of p-clamps and zip ties to hold in place? Assembled with TIG-welded –AN fittings, no hose clamps required here! Designed for a return-style fuel system. The lines enter the engine bay on the passenger side under the factory battery location (circled in red). At the rear of the car, the fuel lines install through the side of the spare tire well, allowing easy connection to a trunk-mounted fuel cell. PLEASE NOTE- this part number includes the hard fuel lines ONLY. Shown in the pictures are numerous other items that are available separately (aluminum separators/clamps, fuel filter, etc). The Watson Racing hard fuel lines are typically installed with an Aeromotive Chassis Kit designed specifically for these lines. Though it is not required, the Chassis Kit includes the fuel filter, regulator, fuel sample valve, black aluminum fuel line mounting clamps/separators, and the soft lines that connect the hard fuel lines to the spare tire well-mounted Fuel Cell. Watson Racing can supply these Aeromotive parts; please call to ask for availability. The Aeromotive Chassis Kit is not required to install the Watson hard fuel lines. Since the hard fuel lines use –AN fittings, you are free to make your own soft lines to meet your specific requirements.

Please see WR-FUELCELLBRKT for the Aeromotive fuel cell mounting bracket. Learn More

Standard on our factory built 2014 Drag race cars! Perfect for your 2013 and older Drag Car, or serious Mustang drag car. Designed and developed in conjunction with Ford Performance Racing engineers, this is likely the most track-tested and validated parachute bumper on the planet. Constructed of 4130 chromoly, fully TIG welded, and powder coated black. Designed with the option of adding 4th bolt on each end for added strength (factory bumper only has 3 bolts), which is standard practice for our ’14 factory-built drag car. Places chute receiver through the license plate area for a clean appearance and little modification to the fascia. Originally designed for 2010+ Mustangs, but will fit 2005-2009 as well (hole location may change). Perfect companion with the Watson Racing Chute Mount, part number WR-PARACHUTEMNT AVAILABLE NOW!Learn More

Service replacement part for the (2010-2014) Mustang factory build drag race car
Designed to fill void left when removing side mirrors for race car application
Fits (2010-2014) Mustang
For OFF ROAD USE ONLY
Learn More