Affirm Payments
Buy with monthly payments Get a real-time decision.
FILTER BY

Currently Shopping by:

  1. Remove This Item Price: $400.00 - $499.99
Manufacturer
  1. Innovate
My Cart

You have no items in your shopping cart.

Grid List

Set Descending Direction
  1. Innovate LM-2 Digital Air/Fuel Ratio Meter (Single Sensor)
    $455.05

    Innovate LM-2 Digital Air/Fuel Ratio Meter (Single Sensor)
    The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter?s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2?s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

    -Patented ?Direct Digital? Wideband Technology
    -Wideband O2 Compatible with ALL fuel types
    -Single or Dual Channel Version Available
    -OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
    -Log directly to SD card (included)
    -Playback log data on screen and/or with powerful LogWorks software (included)
    -Large high-contrast graphics LCD
    -Built-in RPM converter (direct frequency or with optional inductive clamp)
    -4 fully-differential analog inputs
    -2 configurable linear analog outputs
    -Positive lock connectors for all connections
    -Innovate MTS serial IN and OUT
    -USB connection to your PC

    The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

    The LM-2 is available in two different kit configurations:

    1) The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included! P/N: 3806Learn More
  2. Innovate Motorsports ECF-1: (FUEL) Ethanol Content & Air/Fuel Ratio Gauge (Complete Kit)
    $499.99

    Four-in-one, ethanol content percentage, fuel temperature, fuel pressure, and wideband air/fuel ratio gauge
    OLED user configurable display (one, two, or four channel viewing modes)
    Ethanol %, Fuel Pressure, Fuel Temperature, Air/Fuel ratio
    °F or °C, AFR or Lambda, PSI, kPa, or BAR
    On screen error reporting for ethanol content sensor and wideband O2
    Warning indicator LED for low fuel pressure (user programmable)
    0-145 PSI (10 Bar) fuel pressure sensor
    4-Configurable analog outputs for use with standalone and other programmable ECU’s as well as external data loggers
    Ethanol Content: 0v = 0%, 5v = 100%
    Fuel Temp: 0v = -40 °F, 5v = 257 °F (-40-125°C)
    Fuel Press: 0v = 0 PSI, 5v = 145.04 PSI (0-10 BAR)
    Wideband Air/Fuel Ratio: 0v = 7.35, 5v = 22.39 AFR (0.50-1.52 Lambda)
    52mm (2 1/6”) diameter gauge body with interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
    No PC required for configuration
    Bosch LSU 4.9 wideband O2 sensor
    Patented DirectDigital™ wideband sensor control, the only 100% digital wideband air/fuel ratio technology!
    Wideband O² Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more)
    Ability to calibrate O² sensor for maximum accuracy
    Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)
    Learn More
  3. Innovate Motorsports ECB-1: (BOOST) Ethanol Content & Air/Fuel Ratio Gauge (Complete Kit)
    $439.00

    Four-in-one, ethanol content percentage, fuel temperature, boost pressure, and wideband air/fuel ratio gauge
    Boost Vision - a real-time calculated approximation of your ECU’s boost limit based on current ethanol content percentage
    OLED user configurable display (one, two, or four channel viewing modes)
    Ethanol %, Vacuum/Boost, Target Boost, Peak Boost, Fuel Temp, Air/Fuel ratio
    °F or °C, AFR or Lambda, inHG, PSI, kPa, or BAR
    On screen error reporting for ethanol content sensor and wideband O2
    Warning indicator LED when actual boost exceeds target boost (user programmable)
    Peak hold function
    4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR)
    3-Configurable analog outputs for use with standalone and other programmable ECU’s as well as external data loggers
    Ethanol Content: 0v = 0%, 5v = 100%
    Fuel Temp: 0v = -40 °F, 5v = 257 °F (-40-125°C)
    Wideband Air/Fuel Ratio: 0v = 7.35, 5v = 22.39 AFR (0.50-1.52 Lambda)
    Pressure readings can be adjusted for altitude differences
    52mm (2 1/6”) diameter gauge body with interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
    No PC required for configuration
    Bosch LSU 4.9 wideband O2 sensor
    Patented DirectDigital™ wideband sensor control, the only 100% digital wideband air/fuel ratio technology!
    Wideband O² Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more)
    Ability to calibrate O² sensor for maximum accuracy
    Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)
    Learn More

Grid List

Set Descending Direction
Recently viewed products