My Cart

You have no items in your shopping cart.

Buy with monthly payments

Get a real-time decision.

Grid List

Set Descending Direction
  1. AEM Wideband UEGO Gauge Controller
    $250.37

    AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.

    NOTE: The 30-4100 Wideband UEGO Gauge Controller that uses the Bosch 4.2 LSU sensor has been superseded to the 30-4110 Wideband UEGO Gauge Controller that uses the Bosch 4.9 LSU sensor. The 30-4110 Wideband Controller Gauge is cosmetically identical to the 30-4100. Instructions for the 30-4100 are still available for download off of AEM's website

    WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?

    AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

    WHY USE A WIDEBAND AIR/FUEL CONTROLLER?

    Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

    WHAT IS FREE-AIR CALIBRATION?

    Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use Bosch 4.9 LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated by Bosch and never require free air calibration!

    CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?

    No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.

    Learn More
  2. AEM Wideband Failsafe Gauge
    $325.79
    The Wideband FAILSAFE Gauge is a Universal Exhaust Gas Oxygen (UEGO—“you-way-go”) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband FAILSAFE Gauge triggers a user defined output function that can save an engine from catastrophic damage.
    Learn More
  3. AEM AEMnet Adapter for Wideband Failsafe Gauge (p/n 30-4900)
    $21.99
    AEMnet is the technology that allows multiple AEMnet enabled devices to share information with each other through a single cable. 

    AEMnet is an open architecture software and hardware interface based on the CAN 2.0 specification, which provides the ability for multiple enabled devices to easily communicate with each other through a single cable. The hardware connection is made through a Deutsch 4P DTM connector and contains 12 volt switched power and ground (2A max) as well as the CAN data lines. Devices connected to the AEMnet transmit data through this one connection and most of these devices receive power from this same connection as well.
    Learn More
  4. AEM X-WiFi Wideband Air/Fuel Controller & EGT Monitor
    $369.99
    AEM 6-in-1 Gauge-Type UEGO Controller
    **NEW AND IMPROVED**


    AEM's Wideband UEGO Controllers are now available in gauges that include a single-channel analog output with a Bosch O2 sensor in one unit! These air/fuel ratio gauges feature an LED readout and sweeping LED "needle" that changes colors as AFR changes from rich to lean. The 52mm (2 1/16 in.) gauge housing fits in most gauge pods, and they can be remotely mounted virtually anywhere.

    24 Color-coded LED display lights provide immediate reference to engines air/fuel ratio (AFR) or Lambda (11.0:1 to 17.0:1)

    * Integrated three-digit display reveals AFR or Lambda in real time (10.0:1 to 18.5:1)

    * User-selectable 0-5v analog output included for use with data loggers and most programmable engine management systems

    * NEW! Switch between AFR or Lambda readout with a twist of a switch (included face plate change is required for proper readout)

    * NEW! Included black and silver bezels, black and white AFR gauge faces and black Lambda gauge face allow you to personalize the look of your gauge!

    * NEW! Quick-Connect system eases installation by allowing users to mount the gauge and sensor wiring separately

    * Ideal AFR monitoring tool for carbureted applications and engine dynamometers

    * Does not oscillate AFR like narrow band sensors

    * Serial data stream included for output of AFR (RS 232)

    * Accurate to 0.1 AFR

    * Bosch UEGO sensor included
    Learn More
  5. AEM Wideband UEGO Replacement Sensor
    $89.99

    OVERVIEW
    This kit includes a Bosch 4.2LSU sensor for use with any AEM Wideband UEGO Controller or Gauge.

    The Bosch 4.2LSU sensor, which gives AEM Wideband controllers their speed and accuracy, is laboratory calibrated at the factory and never requires free air calibration when used with an AEM controller!

    KEY FEATURES

    • No free air calibration required - ever
    • Accurate to 0.1 AFR
    Learn More
  6. AEM Wideband UEGO Gauge Controller (No Sensor)
    $137.17

    AEM's part number 30-4110NS Wideband UEGO air/fuel ratio Controller Gauge is sold without a wideband sensor. This allows users to source a Bosch 4.9LSU sensor separately to potentially save money.

    Learn More
  7. AEM Flex Fuel Wideband Failsafe Gauge (Without Flex Fuel Sensor)
    $352.45

    The Flex Fuel Wideband FAILSAFE Gauge (PN 30-4910 w/o Ethanol Content Sensor) displays Air/Fuel Ratio, Boost/Vacuum and Ethanol Content, and can actively protect your engine from damage if it runs lean or excessively rich. IF YOU NEED AN ETHANOL CONTENT SENSOR WITH YOUR FLEX FUEL WIDEBAND FAILSAFE GAUGE, PLEASE CLICK ON PN 30-4911.

    Learn More
  8. AEM Flex Fuel Wideband Failsafe Gauge (With Flex Fuel Sensor)
    $534.74

    The Flex Fuel Wideband FAILSAFE Gauge (PN 30-4911 w/ Ethanol Content Sensor) displays Air/Fuel Ratio, Boost/Vacuum and Ethanol Content, and can actively protect your engine from damage if it runs lean or excessively rich. IF YOU HAVE A FLEX FUEL SENSOR, PLEASE CLICK ON PN 30-4910.

    Learn More

Grid List

Set Descending Direction