Aeroforce 5v Regulated Power Supply

Simply connects to switched 12v and ground to supply 5v to our sensor kits. Eliminates the need to tap into other sensor wires or the PCM.

For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Both sensors have a range of 150 psi and come with the proper mating connector and 5' pigtail. They have a 1/8" male NPT fitting. These sensors use a constant 12v power source, so they are included with a 12v regulator as the variable voltage system on todays vehicles will not power the sensor properly. We also carry -4 adapters to help with fuel pressure installation. 

AeroForce gauges come standard with a black bezel out of the box. Further customize your AeroForce gauge with polished or silver anodized bezels.

NOTE: Dual gauge orders require two faces and or 2 bezels

Gauges come configured with a black face and black bezel with an included white face. Additional optional hardware such as silver face or brushed aluminum bezel can be ordered here.

NOTE: Dual gauge orders require two faces and or 2 bezels

*These faces only work on the latest hardware. They will not work on the old style gauges with unremovable bezels.

AeroForce 3.5 Bar MAP Boost/Vacuum Sensor Kit

This sensor kit is an OEM quality unit with 0-5v outputs which is compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.

This sensor kits also contains an OEM sensor with 0-5v output and correct weathertight connector and pigtail. 5 bar sensor has a male 3/8" NPT fitting. These sensors can be used on an any vehicle.

AeroForce 2 Bar MAP Boost/Vacuum Sensor Kit

This sensor kit is an OEM quality unit with 0-5v outputs which is compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.

This sensor kits also contains an OEM sensor with 0-5v output and correct weathertight connector and pigtail. 5 bar sensor has a male 3/8" NPT fitting. These sensors can be used on an any vehicle.

Contains everything you need to control a 12v 40A relay (included) via the annunciator function of the gauge. Kit includes necessary wiring, control module, and relay. Possible applications are controlling an electric cooling fan, turning on/off a water/alcohol injection kit, turning on/off a nitrous kit, etc. For example, one of our customers monitors knock retard and when an unsafe level is seen the gauge turns off his nitrous system. OBD2 parameters as well as analog inputs can be used to trigger the output. Firmware versions 2.6 (non CAN) and 3.4 (CAN) have the necessary code to use this module. The version number can be found on the back of each gauge. Prior versions will need to be reflashed. Contact service@aeroforcetech.com for details if you have an older version. 

NOTE: The speed and accuracy at which the relay activates is based on the vehicle's OBD2 bus. CAN bus vehicles will have the fastest response rates due to the increased speed of these communication systems. Our PT, FD, and SR series gauges use a slightly slower protocol but are still relatively fast (about 10x second), the ISO series may not be suitable for applications that require very fast response times due the slower nature of these buses. The user can determine if the response will be fast enough by watching the update rate of the parameters being displayed. The output/annunciator will respond at the same rate as the data shown on the display. Keep in mind that a data rate of "1" is the fastest. Refer to the user manual for the procedure of setting the data rate.

For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Both sensors have a range of 150 psi and come with the proper mating connector and 5' pigtail. They have a 1/8" male NPT fitting. These sensors use a constant 12v power source, so they are included with a 12v regulator as the variable voltage system on todays vehicles will not power the sensor properly. We also carry -4 adapters to help with fuel pressure installation.