The factory swaybar mounts won't clear a 15" drag wheel. Until now, racers have been cutting the brackets leaving no option other than eliminating the swaybar. These all stainless brackets allow the user to relocate the swaybar further up on the bracket. While the OE bracket must still be cut, our kit provides a new mounting point for the swaybar. Easy 1-2 hour job, hardware and instructions included.

**NOTE: When using this kit on 2011 and newer models equipped with CAB005 Control Arm Relocation Brackets, extensive modification will be necesarry to the CAB005.**

**NOTE: Our XSB005 Anti-roll bar is the preferred choice for customers with 2011 and newer models that want to use the CAB005 with a 15" drag wheel. The XSB005 eliminates the need for the SRK001 kit.**

Learn More

BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. Front swaybar is a lightweight, hollow 35mm bar. All necessary bushings and hardware included.

Learn More

BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. This bar offers solid 22mm construction. All necessary bushings and hardware included. NOTE: BMR rear swaybars are not compatible with convertible models unless the additional OE convertible bracing is removed.

Learn More

BMR 2011 Mustang Front and Rear Swaybar Kit

Kit Includes BMR's front and rear swaybars.

BMR sway-bars decrease body roll in your Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. Front swaybar is a lightweight, hollow 1-3/8" bar while the rear is solid 7/8". All necessary bushings and hardware included. Available in Silver Vein standard or red powdercoat for an additional charge.

NOTE: BMR rear swaybars are not compatible with convertible models unless the additional OE convertible bracing is removed.

Learn More

 

BMR billet end links are a great upgrade to any brand rear swaybar that is 22mm (7/8") diameter. BMR rear sway bars come with these standard.

*Fits stock 2011+ V-6 Mustang Rear Sway Bars.

Learn More

Stop the sway around corners with this adjustable front sway bar kit from BMR!

Like all BMR products, this kit is proudly made in the USA.Hard launches from high horsepower cars at the drag strip require more that just a normal street-style sway bar. BMR Suspension’s Extreme Anti Roll Bar for 2005-2014 Mustang or 2007-2014 Shelby GT500 allows you to launch harder without excessive body roll limiting traction. Manufactured from heavy-wall 1.5-inch DOM tubing, BMR’s Anti Roll Bar (ARB753) is our strongest and stiffest Anti-Roll Bar for the S197 Mustang platform. The BMR Extreme Anti Roll bar is strictly designed to eliminate body roll and transfer maximum power to the rear wheels. The ARB753 attaches to your Mustang with heavy-duty spherical bearings. The mounting plates attach to the stock lower control arm mounts or BMR’s CAB005 control arm relocation brackets. The bar is 100% bolt-on and requires zero modification or fabrication to the chassis or rearend. The fabricated, laser cut, steel sway bar arms are reinforced to add strength and eliminate deflection. BMR Suspension designed the ARB753 sway bar specifically for drag race applications. The large adjustable extreme anti roll bar has two positions, giving you the versatility to dial in the perfect amount of body roll. The ARB753 gives you as much as ¬ 5.430% in rate over the stock bar (depending on year and model). The rate increases and adjustability allow you to virtually eliminate body roll so you can leave the starting line harder with maximum traction. The hollow design gives you loads of strength without adding a lot of weight. The heavy-duty spherical bearings solidly mount the sway bar to the chassis, reducing deflection. This allows for better body roll control, which equals more traction and consistent launches. When performance is a must, rely on BMR Suspension! *** NOTE: This anti roll bar is recommended for drag race applications only. Street use without disconnecting one end link can result in broken components.*** BMR Suspension’s ARB753 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Features
- Fits all 2005-2014 Mustangs and 2007-2014 Shelby GT500’s
- Designed specifically for drag race applications
- Our strongest and stiffest Anti-Roll Bar for the S197 Mustang platform
- Eliminates body roll
- Up to 5.430% increase is sway bar rate over stock sway bar (depending on year and model)
- Manufactured from 1.5-inch 0.219-inch wall DOM tubing for increased strength
- Two-way adjustable
- Adjustability allows for fine-tuning of suspension
- 100% bolt-on
- Heavy-duty spherical mounting bearings
- Durable powdercoat finish
- 1-2-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.

Application
2005 - 2014 Mustang
Available Colors
Black Hammertone Powercoat
Red PowercoatLearn More

Stop the sway around corners with this adjustable front sway bar kit from BMR!

Like all BMR products, this kit is proudly made in the USA.Hard launches from high horsepower cars at the drag strip require more that just a normal street-style sway bar. BMR Suspension’s Extreme Anti Roll Bar for 2005-2014 Mustang or 2007-2014 Shelby GT500 allows you to launch harder without excessive body roll limiting traction. Manufactured from heavy-wall 1.5-inch DOM tubing, BMR’s Anti Roll Bar (ARB753) is our strongest and stiffest Anti-Roll Bar for the S197 Mustang platform. The BMR Extreme Anti Roll bar is strictly designed to eliminate body roll and transfer maximum power to the rear wheels. The ARB753 attaches to your Mustang with heavy-duty spherical bearings. The mounting plates attach to the stock lower control arm mounts or BMR’s CAB005 control arm relocation brackets. The bar is 100% bolt-on and requires zero modification or fabrication to the chassis or rearend. The fabricated, laser cut, steel sway bar arms are reinforced to add strength and eliminate deflection. BMR Suspension designed the ARB753 sway bar specifically for drag race applications. The large adjustable extreme anti roll bar has two positions, giving you the versatility to dial in the perfect amount of body roll. The ARB753 gives you as much as ¬ 5.430% in rate over the stock bar (depending on year and model). The rate increases and adjustability allow you to virtually eliminate body roll so you can leave the starting line harder with maximum traction. The hollow design gives you loads of strength without adding a lot of weight. The heavy-duty spherical bearings solidly mount the sway bar to the chassis, reducing deflection. This allows for better body roll control, which equals more traction and consistent launches. When performance is a must, rely on BMR Suspension! *** NOTE: This anti roll bar is recommended for drag race applications only. Street use without disconnecting one end link can result in broken components.*** BMR Suspension’s ARB753 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Features
- Fits all 2005-2014 Mustangs and 2007-2014 Shelby GT500’s
- Designed specifically for drag race applications
- Our strongest and stiffest Anti-Roll Bar for the S197 Mustang platform
- Eliminates body roll
- Up to 5.430% increase is sway bar rate over stock sway bar (depending on year and model)
- Manufactured from 1.5-inch 0.219-inch wall DOM tubing for increased strength
- Two-way adjustable
- Adjustability allows for fine-tuning of suspension
- 100% bolt-on
- Heavy-duty spherical mounting bearings
- Durable powdercoat finish
- 1-2-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.

Application
2005 - 2014 Mustang
Available Colors
Black Hammertone Powercoat
Red PowercoatLearn More

BMR 2011 Mustang Front and Rear Swaybar Kit

Kit Includes BMR's front and rear swaybars.

BMR sway-bars decrease body roll in your Mustang resulting in a more predictable, neutrally balanced suspension. Our sway-bars are made from high quality, cold formed aircraft spec tubing which allows the bar to resist torsional fatique much better than hot formed bars. Front swaybar is a lightweight, hollow 1-3/8" bar while the rear is solid 7/8". All necessary bushings and hardware included. Available in Silver Vein standard or red powdercoat for an additional charge.

NOTE: BMR rear swaybars are not compatible with convertible models unless the additional OE convertible bracing is removed.

Learn More