Affirm Payments
Buy with monthly payments Get a real-time decision.
My Cart

You have no items in your shopping cart.

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2
  1. BMR 05-2010 Mustang Adjustable Upper Control Arm w/ Spherical Bearings (Black Hammertone)
    $159.95

    The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is TIG welded. Angle finders available through BMR. *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM001.

    Learn More
  2. BMR 05-2010 Adjustable Upper Control Arm with Poly Bushings (Black Hammertone)
    $159.95

    The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is TIG welded. They are available with polyurethane bushings or spherical bearings. Angle finders available through BMR. *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM001.

    Learn More
  3. BMR 05-2010 Mustang Tubular Upper Control Arm with Spherical Bearings (Black Hammertone)
    $129.95

    The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is MIG welded. *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM001.

    Learn More
  4. BMR 05-2010 Mustang Tubular Upper Control Arm with Poly Bushings (Black Hammertone)
    $79.95

    The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is MIG welded. *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM001.

    Learn More
  5. BMR 05-2010 Mustang Upper Control Arm Mount (Black Hammertone)
    $119.95

    Our upper control arm mount is a direct replacement for the OE piece and requires no drilling or welding to install. The last generation Fox body Mustangs had upper control arm mounts incorporated into the frame. They also had two upper control arms sharing the load but drag racers were continually ripping the mounts off of the frame when racing. The solution for those cars was to weld reinforcement plates onto the frame. This new Mustang platform only has one upper control arm and the mount is only bolted into place. Our upper mount is made from heavy duty 1/4" plate and can be either bolted or welded into place. Additionally it has dual control arm mounting points for changing instant center.

    Learn More
  6. BMR EN001 Upper Control Arm Dual-Durometer Rear End Bushing Kit
    $59.95

    - Fits 2005-2014 S197 Mustang
    - Designed for street performance, drag race, and handling applications
    - Multi-durometer polyurethane differential bushing
    - Decreased bushing deflection
    - Internally fluted bushings
    - Zinc-coated inner sleeves
    - Works with stock and aftermarket control arms
    - Proudly designed in the U.S.A.
    - Proudly made in the U.S.A.
    Learn More
  7. BMR 05-2010 Mustang Adjustable Upper Control Arm w/ Spherical Bearings (Red)
    $159.95

    The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is TIG welded. Angle finders available through BMR. *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM001.

    Learn More
  8. BMR 05-2010 Adjustable Upper Control Arm with Poly Bushings (Red)
    $159.95

    The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle. For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. Our upper control arm is made from 1 5/8" .120 wall DOM tube and is TIG welded. They are available with polyurethane bushings or spherical bearings. Angle finders available through BMR. *BMR strongly recommends upgrading the stock Upper Control Arm Mount when utilizing an aftermarket Upper Arm on S197 Mustangs. Clunking noise may become present without an upgraded Upper Control Arm Mount. The correct part # for this application is UCM001.

    Learn More
  9. BMR 05-2010 Mustang Upper Control Arm Mount (Red)
    $119.95

    Our upper control arm mount is a direct replacement for the OE piece and requires no drilling or welding to install. The last generation Fox body Mustangs had upper control arm mounts incorporated into the frame. They also had two upper control arms sharing the load but drag racers were continually ripping the mounts off of the frame when racing. The solution for those cars was to weld reinforcement plates onto the frame. This new Mustang platform only has one upper control arm and the mount is only bolted into place. Our upper mount is made from heavy duty 1/4" plate and can be either bolted or welded into place. Additionally it has dual control arm mounting points for changing instant center.

    Learn More

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2