My Cart

You have no items in your shopping cart.

Buy with monthly payments

Get a real-time decision.

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Zex EFI WET Nitrous Kit
    $689.95

    Zex EFI WET Nitrous Kit

    Fully Adjustable from 75-125HP

    A complete "Wet" nitrous system. Everything is included for a safe, proper installation.

    Designed to work safely on stock type engines, but is also engineered to perform flawlessly on highly modified turbocharged and supercharged combinations. The ideal nitrous system for any fuel injected vehicle.

    All major components are factory pre-assembled inside the "Nitrous Management Unit". Easy, plug and play, two-hour installation.

    ZEX Nitrous Systems have an advanced, patented feature called "Active Fuel Control". This feature monitors nitrous bottle pressure and adds or subtracts enrichment fuel so the engine never runs too rich, or too lean, when you engage the nitrous system.

    ZEX "Wet" nitrous systems activate at wide-open throttle using advanced electronics that monitor your engine's throttle position sensor. This makes using your nitrous system very easy and reliable. Learn More
  2. Zex EFI WET Nitrous Kit (Blackout)
    $794.95

    Zex EFI WET Nitrous Kit (Blackout)

    Fully Adjustable from 75-125HP

    ZEX™ Blackout Nitrous Systems™ are unprecedented for looks, performance and power potential. Like all ZEX™ nitrous systems, the Blackout Kits incorporate the most technically advanced performance features available, including the patented ZEX™ Active Fuel Control™. This feature automatically adjusts the nitrous fuel enrichment so your engine never runs too rich or too lean. In addition, the ZEX™ Blackout Nitrous Systems™ feature a throttle-by-wire compatible electronic TPS switch for system activation at wide open throttle. Power settings vary for each application specific kit and all ship complete with appropriate tuning jets, as well as fuel tap fittings, solenoids, filters & all necessary activation electronics.

    Systems feature all-new black powder-coated bottles, carbon-fiber look hoses, and fittings for a variety of carbureted & fuelinjected applications that are perfect for street/strip and all-out drag racing applications. Don’t get left in the dark – order your ZEX™ Blackout Nitrous System™ today!

    Learn More
  3. Nitrous Express Ford EFI Single Nozzle System w/10lb Bottle
    $795.02

    The NX Stage 1 EFI nitrous system is the top of the line EFI power booster on the market. From the billet aluminum and carbon fiber solenoids, to our patented Shark nozzle, this system screams nothing but quality.

    This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, 24in D-3 stainless braided solenoid to nozzle lines, 15 Foot D-4 stainless braided nitrous feed line, 18in D-4 fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay, relay harness, Ford fuel rail fitting, stainless bottle brackets and a 10 lb nitrous bottle with the Lightning 45 bottle valve. This system includes jetting for 35, 50, 75, 100 and 150HP. The system can be easily upgraded later to support up to 250HP.

    This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

    The billet aluminum Lightning 45 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .325 orifice and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks sexy, flows great and weighs nearly one full pound less than our old style NX 45 valve.

    Learn More
  4. NOS E.F.I. Nitrous Wet Kit 35-125 HP (ADJUSTABLE)
    $885.95

    NOS E.F.I. Nitrous Wet Kit 35-125 HP (ADJUSTABLE)

    The Ultimate Single Fogger Wet System!

    NOS is pleased to anounce it's new PowerFogger 4-, 6-, and 8-cylinder PowerFoggerTM wet kits. The latest in NOS's cutting-edge nitrous kits, the 05130NOS, 05131NOS are great for vehicles where an NOS application specific kit is not available.The highest-quality NOS components are utilized for the best-looking, best performing system on the market. Just like other NOS kits, the PowerFoggerTM has been thoroughly dyno-tested on numerous vehicles to ensure that customers get safe, dependable results on any vehicle they decide to "squeeze."

    Features

  5. Exclusive NOS "Soft-Plume" Fogger nozzle producing the finest and safest fuel/nitrous mixture.
  6. NOS 10-pound blue bottle w/ brackets & high flow bottle valve.
  7. Industry-leading instruction manual.
  8. 75-100-125 Horsepower jetting for 8 cylinder kit.
  9. Micro switch, safety relays and all other components for a simple installation.


  10. System Requirements

    The stock fuel pump should be adequate, but it should be capable of meeting NEW pump specs. If unsure, replace. Use only premium grade pump gasoline (92+ octane) or unleaded racing fuel. In many instances, a high-output ignition system and a free-flowing exhaust system may benefit performance. WARNING: DO NOT use aftermarket chips or other devices that advance ignition timing, as detonation may occur.

    NOTE:Actual performance gains will vary depending on the engine's condition and configuration. The system can be used on an engine with stock rods, pistons and crankshaft. However, at power levels of 140 and above, it is recommended that heavy-duty forged components be used.

    Recommended Optional Accessories:

  11. N2O Gauge
  12. Fuel Pressure Gauge
  13. Bottle Heater
  14. Progressive Nitrous Controller
  15. Purge Valve
  16. Learn More
  • Nitrous Outlet 22-82001 X-Series 99-04 Mustang GT / Cobra / Mach 1 EFI Single Nozzle System
    $499.99

    Application. This system is compatible with all 1999-2004 Mustang GT, Cobra, Mach 1 applications
    Learn More
  • Nitrous Express Universal Dry EFI System (35, 50, 75, 100 or 150hp) - 21000
    $362.74

    This system provides nitrous through a single Dry Nozzle. This system does not add fuel and is intended to be used with an engine management system that can add nitrous enrichment fuel through the engines injectors. Includes nitrous jets for 35-50-75-100-125 &150 HP. This NX Dry nitrous system comes complete with a 1/8npt dry nozzle, a single .093 Lightning solenoid, systems with a bottle include the billet Lightning bottle valve, wide open throttle switch, stainless bottle brackets, extra long stainless braided N2O line, relay with harness and all necessary hardware to complete the installation. Learn More
  • Nitrous Express 96-04 4v Nitrous Plate System w/ 10 lb Bottle
    $994.75

    The Nitrous Express 4 Valve Plate System features a billet nitrous plate that fits between the throttle body and intake making installation quick, simple, and attractive. The system includes billet aluminum and carbon fiber nitrous and fuel solenoids for ultimate performance and weight savings. The system includes a Schrader valve fuel rail adapter for simple fuel system hook-ups, TPS wide open throttle switch, 15 foot nitrous feed line, master arming switch, relay, relay harness, and all necessary hardware to complete installation. System comes with jetting from 35hp-300hp. System can be purchased with 5, 10 or 15lb bottle, all of which include the Billet aluminum Lightning 45 bottle valve. Fits 1996-2004 Cobra and Mach 1 Mustangs Learn More
  • Nitrous Express 96-04 4v Nitrous Plate System with 5lb Bottle
    $984.76

    The Nitrous Express 4 Valve Plate System features a billet nitrous plate that fits between the throttle body and intake making installation quick, simple, and attractive. The system includes billet aluminum and carbon fiber nitrous and fuel solenoids for ultimate performance and weight savings. The system includes a Schrader valve fuel rail adapter for simple fuel system hook-ups, TPS wide open throttle switch, 15 foot nitrous feed line, master arming switch, relay, relay harness, and all necessary hardware to complete installation. System comes with jetting from 35hp-300hp. System can be purchased with 5, 10 or 15lb bottle, all of which include the Billet aluminum Lightning 45 bottle valve. Fits 1996-2004 Cobra and Mach 1 Mustangs Learn More
  • Nitrous Express 96-04 4v Nitrous Plate System with 15lb Bottle
    $1,069.75

    The Nitrous Express 4 Valve Plate System features a billet nitrous plate that fits between the throttle body and intake making installation quick, simple, and attractive. The system includes billet aluminum and carbon fiber nitrous and fuel solenoids for ultimate performance and weight savings. The system includes a Schrader valve fuel rail adapter for simple fuel system hook-ups, TPS wide open throttle switch, 15 foot nitrous feed line, master arming switch, relay, relay harness, and all necessary hardware to complete installation. System comes with jetting from 35hp-300hp. System can be purchased with 5, 10 or 15lb bottle, all of which include the Billet aluminum Lightning 45 bottle valve. Fits 1996-2004 Cobra and Mach 1 Mustangs Learn More
  • Grid List

    Set Descending Direction
    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5