NOS Bottle Heater for 10 lb. & 15 lb. bottles, 12 volt DC

Nitrous pressure should be kept consistent to obtain optimum performance. All NOS systems are designed to work best with a bottle pressure of 900-950 PSI. Pressure is determined by the amount of nitrous contained in the bottle and temperature. The chart below shows what happens to nitrous at various temperatures. Accordingly, it's a good idea to use an NOS bottle heater and/or blanket. Likewise, maintaining consistent line filling is important...which is why most racers use an NOS purge valve to release nitrous vapor from the feed line. This provides liquid nitrous to the inlet of the solenoid(s) for better consistency and repeatability.

Bottle Heaters

NOS systems are calibrated for optimum performance with a bottle pressure of 900-950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled to keep the bottle near 85F to provide correct pressure.Learn More

NOS Purge valve kit for -4AN line

Nitrous pressure should be kept consistent to obtain optimum performance. All NOS systems are designed to work best with a bottle pressure of 900-950 PSI. Pressure is determined by the amount of nitrous contained in the bottle and temperature. It's a good idea to use an NOS bottle heater and/or blanket. Likewise, maintaining consistent line filling is important...which is why most racers use an NOS purge valve to release nitrous vapor from the feed line. This provides liquid nitrous to the inlet of the solenoid(s) for better consistency and repeatability.

Purge Valves - Control System Pressure For Optimum Power!
The primary purpose of a purge valve is to release trapped air or gaseous nitrous from feed line(s). Helps to ensure consistent performances. And it looks cool, too. You've probably seen the Import or Pro Mod guys do it. Includes all required components.Learn More

Learn More

NOS 2 Stage WOT/RPM Activated Window Switch

Tired of having to replace RPM pills every time you want to change the activation RPM of your nitrous kit? How About needing two RPM activated window switches to control your 2 stages of nitrous? Well, your worries and woes are over.

Nitrous Oxide Systems is proud to present our 2 Stage Wide Open Throttle/ RPM activated Window Switch with Shift Light Control. The WOT/RPM activated window switch is a small, compact, user friendly unit with features like, 2 fully programmable independent RPM window switches that can operate from 0 to 20,000 RPM for anything from a low rpm engine to a high revving sport bike. It has the capability to read a rising or falling throttle position sensor for accurate activations every time. The WOT/RPM activated window switch also features a programmable output to activate a shift light for on–time gear pounding shifts and a handy recall feature that shows max RPM and TPS voltage for easy set–up. Also comes in the 02121NOS, 05134NOS, and 05135NOS kits.

Window switches have just been taken to the next level

Learn More

Features/Benefits:
 New Mini 2-Stage Progressive Nitrous Controller
 New Hand Held Color LCD 2.4” Touch Screen Display w/ Micro SD Memory Card to Store Tunes and Software Updates
 Touch screen Stylus included
 2 Fully Independent Stage Outputs – Allows Programming in Any Curve Shape or With Builtin Ramp Builder Application
 Progressive Solenoid Operation Based on Time, RPM, and/or TPS (Throttle Position Sensor) Input and Can Shut Nitrous Off at a Programmed RPM Ceiling
 Controller Housing Designed and Constructed to Handle Harsh Conditions in a Racing Environment
 Allows the User to Drive the Solenoids at Different Duty Cycles to Tailor Power Delivery to the Engine as Needed
 Optional Bottle Pressure Transducer Input Allows Precise Bottle Pressure Monitoring Without Leaving the Driver’s Seat

Getting the most out of your nitrous system and putting more power to the ground when traction is at its best is the goal with anyone using nitrous as a Power Adder. The new, updated Mini 2-stage progressive nitrous controller from NOS is packed with features that makes that challenge much easier.

Two completely independent stages of nitrous/fuel control, each with independent throttle position activation switch and progressive ramps. RPM on/off control eliminates the need for a window switch and allows you to turn the nitrous on and off at set points & conditions. Two programmable outputs, allowing control of timing retard or other devices. The hand held 2.4" LCD touch screen display (w/ included stylus), makes programming quick and simple and allows you to mount the main controller housing out of sight. The LCD also displays RPM, bottle pressure (optional), and stage activation providing robust monitoring of your Nitrous system.

Learn More

Features/Benefits:
 New Mini 2-Stage Progressive Nitrous Controller
 New Hand Held Color LCD 2.4” Touch Screen Display w/ Micro SD Memory Card to Store Tunes and Software Updates
 Touch screen Stylus included
 2 Fully Independent Stage Outputs – Allows Programming in Any Curve Shape or With Builtin Ramp Builder Application
 Progressive Solenoid Operation Based on Time, RPM, and/or TPS (Throttle Position Sensor) Input and Can Shut Nitrous Off at a Programmed RPM Ceiling
 Controller Housing Designed and Constructed to Handle Harsh Conditions in a Racing Environment
 Allows the User to Drive the Solenoids at Different Duty Cycles to Tailor Power Delivery to the Engine as Needed
 Optional Bottle Pressure Transducer Input Allows Precise Bottle Pressure Monitoring Without Leaving the Driver’s Seat

Getting the most out of your nitrous system and putting more power to the ground when traction is at its best is the goal with anyone using nitrous as a Power Adder. The new, updated Mini 2-stage progressive nitrous controller from NOS is packed with features that makes that challenge much easier.

Two completely independent stages of nitrous/fuel control, each with independent throttle position activation switch and progressive ramps. RPM on/off control eliminates the need for a window switch and allows you to turn the nitrous on and off at set points & conditions. Two programmable outputs, allowing control of timing retard or other devices. The hand held 2.4" LCD touch screen display (w/ included stylus), makes programming quick and simple and allows you to mount the main controller housing out of sight. The LCD also displays RPM, bottle pressure (optional), and stage activation providing robust monitoring of your Nitrous system.

Learn More