My Cart

You have no items in your shopping cart.

Buy with monthly payments

Get a real-time decision.

Grid List

Set Descending Direction
  1. Recon White LED Reverse Light
    $14.95

    Recon 99-04 Mustang White LED Reverse Light

    **Bulbs are sold individually. You'll need 2 LED bulbs to replace the stock ones**


    The RECON LED Reverse lights are a direct replacement on any 99-04 Mustang. Get rid of that yellow stock looking light and replace it with a clear and bright White light. Easy to install. You won't believe how crisp they look once they're in.

    RECON's New LED Bulbs Feature extremely low power consumption, have built-in current limiting resistors, generate practically no heat, and boast a longer life expectancy than any other automotive LED bulb currently available. RECON LED bulbs have an average life expectancy of up to 80,000 hours.

    Don't get caught in the dark again...Light It Up WIth RECON!!!!!

    ***ATTENTION - VERY IMPORTANT MESSAGE BELOW***

    These bulbs are sold individually which means only 1 bulb comes in each package. This means if you need a total of 2 bulbs, you must enter a qty of 2.
    Learn More
  2. Recon LED Brake Light Kit (Includes 6 LED Bulbs)
    $89.70

    Recon 05-09 Mustang LED Brake Light Kit (Includes 6 LED Bulbs)

    NOTE: Does not include reverse bulbs

    This kit is designed to replace the 6 stock conventional brake light/tail light bulbs on your 05-09 Mustang V6, GT or GT500.

    Looking to replace those crappy conventional bulbs with some high quality LED's? Then this is the kit for you.

    Included are 6 3157 LED bulbs which will replace the 6 brake lights (3 on each side) as well as (4) resistors which will allow the turn signals to function properly. The LED bulbs are direct plug in bulbs. All you have to do is remove the tail light assembly, remove the old bulbs from the wiring harness and plug the new ones in.Then install the 2 resistors which are supplied with splicing accessories and you're all set.

    These LED bulbs take less power to run and have built-in current limiting resistors, generate practically no heat, and boast a longer life expectancy than any other automotive LED bulb currently available. RECON LED bulbs have an average life expectancy of up to 80,000 hours.

    Each LED bulb in this kit is actually made with 13 LED's so you can be sure they're nice and bright.

    Don't get caught in the dark again...Light It Up WIth RECON!!!!!

    NOTE: RECON LED's will not work on cars using a sequential tail light harness kit.

    Learn More
  3. Recon 99-04 Mustang License Plate Bulbs / 05-12 Mustang LED Dome Lights (White-Set of 2)
    $24.95

    Recon 99-04 Mustang License Plate Bulbs / 05-12 Mustang LED Dome Lights (White-Set of 2)

    Sold as a pair

    All new at Lethal Performance for your Mustang is the Recon White LED Dome Light replacement bulbs for 05-12 Mustangs. These can also be used on all 99-04 Mustangs as license plate bulbs. The Recon Dome LED lights are a direct replacement and can be installed in less than 5 minutes. Get rid of the stock yellow looking interior light and replace it with a nice White LED. We were very impressed with how much of an improvement they made on the LethalGT500.

    The new LED Bulbs Feature extremely low power consumption, have built-in current limiting resistors, generate practically no heat, and boast a longer life expectancy than any other automotive LED bulb currently available. RECON LED bulbs have an average life expectancy of up to 80,000 hours.

    NOTE: LED's require a resistor or they will have a slight glow to them after the vehicle is turned off. However the current that is drawn to create the glowing bulb is not enough to drain your battery.

    Installation Video

    www.youtube.com/watch

    Learn More
  4. Diode Dynamics 94-2009 Mustang GT Rear Turn/Tail Light LED's (Set of 6)
    $120.00

    FUNCTION

    From the factory, rear turn signal bulbs are powered by standard incandescent lights that light up white in color, and cast light through your red or amber tail light lens. This results in a washed-out color. Newer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on/off function, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look! The installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see "hyperblinking" section below.

    BULB DESIGN
    SMD27: 27 three-chip 5050-size Epistar SMDs arranged in 360 degrees. Six radial panels of three chips, and a forward-facing six-chip panel. Main body material is PCB.
    HP11: Four side-firing 1.5W-rated Osram LED chips, and one 5W-rated CREE LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.
    XP80: Each of the four sides of this bulb contains three 5W-rated CREE chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

    Fitment. All three bulbs use a quality inject-molded 3157 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 3157 bulb.

    Included in your order is SIX BULBS.

    Learn More

Grid List

Set Descending Direction