My Cart

You have no items in your shopping cart.

Buy with monthly payments

Get a real-time decision.

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2
  1. AFCO Pro-Series Dual Pass Heat Exchanger
    $577.49

    AFCO GT500 Pro-Series Dual Pass Heat Exchanger

    All new from AFCO is the Pro-Series Heat Exchanger for the Shelby GT500. If you didn't already know AFCO currently makes the best selling and best performing heat exchanger for the 2003-2004 Mustang Cobra. Well they're going to do just the same for the GT500 by offering the same technology and quality with their Pro-Series H/E.

    When dealing with Roots or Twin Screw Superchargers there's always the issue of intake temps. When running the car hard and spinning the blower fast you create heat. Heat equals a loss in power as well as the possibility of damage to the engine. One way to help reduce these intake temps and the risk of damage is to add more fluid into the intercooler system which in turn helps lower intake temps by dissapating heat.

    Whether it be on the street or at the track the warmer the car runs the more timing gets pulled. In addition to that an excessive amount of heat known as heat soak starts to take place. This keeps the car down on power and running less efficient. This again can be helped by adding more fluid into the cooling system. The temperature of the intercooler fluid will lower and cool down faster in between runs.

    Here is a rundown of AFCO Pro-Series heat exchanger vs. Stock:

    Core Size
    AFCO core is 9" tall x 22.44" wide x 2" thick.
    Stock is 6" tall x 23" wide x 1.25" thick.

    Height:
    Stock 6"
    AFCO 9"

    Width: Stock 23"
    AFCO 22.5"

    Thickness: Stock 1.25"
    AFCO 2.0"

    Front Face Area
    Stock 138 sq. in.
    AFCO 202 sq. in. (50% increase)

    Overall Surface Area:
    Stock 690 sq. in.
    AFCO 1616 sq. in. (135% increase)

    Here's some of the features of the AFCO Pro-Series Heat Exchanger for the Shelby GT500:

    • Fits 2011-2012 - 2011-2012 Shelby GT500 Mustang
    • High efficient double pass design vs. OEM single pass
    • Increased HP do to a dramatic intake temperature drop compared to stock
    • A 60-70 degree intake temp reduction is possible at wide open throttle because of the improved cooling efficiency this AFCO design
    • Quicker cool down times in between runs at the track
    • Helps prevent heat soak and detonation due to increased intake temps
    • Simple do-it-yourself bolt on installation
    • Furnace brazed core (no epoxies) with beautifully tig welded tank construction



    Cooler intake temperatures mean more power. It is just that simple. However, providing your engine with cool air to breathe becomes even more difficult when forced induction is involved.

    Ford's potent supercharged V8 is no exception. This is why Ford designed a separate intercooling system for the supercharger on their popular F150 Lightning, Shelby GT500 and 03-04 Mustang Cobra.

    The Ford system utilizes a heat exchanger mounted low in the front grill, which is very similar to a small radiator. Coolant flows separately from the main engine cooling system and circulates internally through the intercooler beneath the supercharger.

    While the factory supercharger cooling system is adequate in stock configuration, it struggles to keep up with the multitude of popular modifications that not only deliver more power, but also increase the stress and strain on the engine.

    To combat the power loss by excessive heat build up in the supercharger and intake system, AFCO focused on upgrading the weakest component in this cooling system: THE HEAT EXCHANGER.

    AFCO Heat Exchangers are considerably larger than their stock counterparts. This provides a greater surface area and more capacity. AFCO Heat Exchangers reduce supercharger coolant temperatures by more than 40 degrees.

    True Bolt-In Installation No Cutting No Drilling No Welding No Headaches
    AFCO Heat Exchanger installation only requires simple hand tools and approximately 2-3 hours. All needed hardware (except replacement fluid) is included, along with detailed instructions.

    Easy Bolt-In Installation
    AFCO Heat Exchangers mount in factory locations with no drilling, cutting or fabrication of any kind “ a TRUE BOLT-IN.

    Regains Lost Power
    By more effectively cooling intake temperatures, AFCO Heat Exchangers keep the air entering the combustion chamber cooler and more dense, even in high-demand situations.

    Allows for More Consistency
    After hard acceleration, especially in drag racing applications, AFCO Heat Exchangers allow the supercharger to cool faster and remain at a constant temperature, which means power delivery is more consistent.

    Optimized Design
    Using years of experience, advanced design, and thorough testing, AFCO Heat Exchangers are designed to promote optimal air flow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application.

    Quality Construction
    Of course, as an AFCO product, quality is second to none. AFCO Heat Exchangers are TIG welded and feature furnace brazed cores with no epoxy. Each unit is pressure-tested before it is shipped.

    Learn More
  2. Fluidyne 05-2014 Mustang 5 Core Triple Pass Heat Exchanger
    $492.91

    Fluidyne S197 Mustang Heat Exchanger

    Supercharger Coolant Cooler for use on all supercharged S197 Mustangs. Also used for GT500 models with addition of optional pump bracket kit part number FHP07GT500-KIT.

    FLUIDYNE introduces a new larger direct-fit replacement low temperature radiator (LTR) for use on S197 Mustangs with aftermarket superchargers and 2007-2012 Shelby GT500's. An optional pump bracket kit is required for use on GT500 models, and allows the re-use of the stock Ford pump. The pump is not included with the bracket kit. The 3-row core configuration utilized to produce this LTR provides a significant decrease in water temperature with a corresponding increase in power.

    In addition, the coolant capacity of 1.97 US Quarts is more than double the capacity of the stock unit. Once again, Fluidyne leads the way in performance cooling upgrades for America's most popular muscle Car.

    Tech Specs:
    Core Size
    Width = 25.0 Inches
    Height = 7.03 Inches
    Depth = 3.15 Inches

    Overall Size
    Width = 28.125 Inches
    Height = 7.15 Inches
    Depth = 3.5 Inches

    Dry Weight = 9.9 lbs
    Hose Connections = .750 Inch Slip-On
    Fluid Capacity = 1.97 US Quarts

    **Dimensions do not include brackets or fittings! Bracket and fittings are sold separately as Fluidyne part number FHP-07GT500-KIT !**

    Note:  This bracket kit is required for installing on FHP35-MUSLTR Low Temperature Radiator on Shelby GT500 models when using the original GT500 pump. Supercharged non-GT500 models using aftermarket supercharger systems do not require this bracket unless using an original GT500 pump.

    Kit Includes:

    - Aluminum mounting bracket
    - 4 bolts with nuts and washers

    - Note: Kit will work only with original Ford GT500 pump -- Pump is not included with the kit

    Learn More
  3. Fluidyne Mustang Heat Exchanger Bracket Kit
    $59.99

    Fluidyne 2011-2012 Mustang Heat Exchanger Bracket Kit

    This bracket kit is required for installing on FHP30-05MUSLTR  Low Temperature Radiator on Shelby GT500 models when using the original GT500 pump. Supercharged non-GT500 models using aftermarket supercharger systems do not require this bracket unless using an original GT500 pump.

    - Aluminum mounting bracket
    - 4 bolts with nuts and washers

    - Note: Kit will work only with original Ford GT500 pump -- Pump is not included with the kit

    Learn More
  4. Shelby American Dual Pass Heat Exchanger w/ Dual Puller Fans
    $799.00

    Whether your Shelby is bone stock or highly modified, supercharged cars get heat soaked. Shelby has discovered the solution: The Shelby Dual Pass/Dual Puller Fan Heat Exchanger.

    Designed by Shelby and C/R, our extreme duty heat exchanger uses a proprietary NASCAR core, which features a single row core with a dual pass system.  

    The intercooler and heat exchanger build higher temperatures in normal, spirited or on track driving conditions. With a stock Shelby or Mustang, the car has an on board computer program begins to curb spark and timing at 100 degrees. 100 degrees within the intercooler and heat exchanger can be achieved within minutes of starting the vehicle. After market tuners change this parameter to begin the timing and spark curb trend at 130 degrees to 140 degrees. Almost all supercharged vehicle owners can comprehend the power difference in their car when they first start it and drive versus 20 minutes later when the car just doesn’t seem to run as well or willing to "Spin the tires" This is what is called "Heat Soak."

    Applications:
    2007-2012 Shelby GT500
    2005-2010 Shelby GT, Mustang GT (4.6L)
    2011-2012 Shelby GT350, Mustang GT (5.0L)

    History:
    Changed from part number "Z12-CR-GT5-CPR002B" on 09 September 2011


    Technical:
    There are two puller fans each pulling 709 CFM. That 1,418 CFM of air flow across the core of the heat exchanger which pulls the heat out of the fluid in the intercooler and heat exchanger.

    Engineered, designed and manufactured in the U.S.A.

    Installation:
    Click here for help on installing this product.

    Genuine Shelby American

    Learn More
  5. AFCO Dual Pass Heat Exchanger w/Dual 10" Fans
    $902.99

    AFCO GT500 Pro-Series Dual Pass Heat Exchanger w/Dual 10" Spal FansLethal Performance is proud to announce the new AFCO Pro-Series Dual Pass Heat Exchanger with DUAL 10" Spal Fans.As many know we were the ones to introduce the AFCO dual pass heat exchanger to the GT500 market. AFCO approached us several weeks ago letting us know that they've finally put together an upgraded unit with dual fans. They obviously know how important it is to keep up with the demand that our customers look for. As we've seen the dual fan heat exchanger has become a very popular unit. Continuous air across the fins of the heat exchanger help in lowering inlet air temps. This will also prevent you from losing power due to heat soak.The addition of (2) 10" Spal fans along with a larger core means business. This will be the largest heat exchanger for the GT500 to this date.If anyone has seen an AFCO product you know it's of the highest quality. The cores, welds and design are used in many high performance applications for both street and track use.Lethal Performance has locked up the entire first batch and we're giving all of our customers a first shot at purchasing them. We expect to have them available by the end of this month. If you're on our mailing list you'll receive an email about the new AFCO heat exchanger tomorrow. If not you can find more info about this piece on our website or by giving us a call.When dealing with Roots or Twin Screw Superchargers there's always the issue of intake temps. When running the car hard and spinning the blower fast you create heat. Heat equals a loss in power as well as the possibility of damage to the engine. One way to help reduce these intake temps and the risk of damage is to add more fluid into the intercooler system which in turn helps lower intake temps by disiapating heat.Whenever you add more boost to your car, cooling becomes extremely important. Whether it be on the street or at the track the warmer the car runs the more timing gets pulled. In addition to that an excessive amount of heat known as heat soak starts to take place. This keeps the car down on power and running less efficient. This again can be helped by adding more fluid into the cooling system. The temperature of the intercooler fluid will lower and cool down faster in between runs. You can do all this with the addition of the AFCO Pro-Series Heat Exchanger and dual fan setup.Here is a rundown of AFCO Pro-Series heat exchanger vs. Stock:Core SizeAFCO core is 11 3/8" x 26 " x 2".Stock is 6" tall x 23" wide x 1.25" thick.Height:Stock 6"AFCO 11 3/8"Width: Stock 23"AFCO 26.25"Thickness: Stock 1.25"AFCO 2.0"Front Face AreaStock 138 sq. in.AFCO 298 sq. in.Fan Type:Dual 10" Spal FansHere's some of the features of the AFCO Pro-Series Heat Exchanger for the Shelby GT500 and S197 Mustang GT:* Fits 2011-2012 Shelby GT500 and 2011-2012 Mustang GT's* High efficient double pass design vs. OEM single pass* DUAL 10" Spal Fans* Increased HP do to a dramatic intake temperature drop compared to stock* Quicker cool down times in between runs at the track* Helps prevent heat soak and detonation due to increased intake temps* Simple do-it-yourself bolt on installation* Furnace brazed core (no epoxies) with beautifully tig welded tank construction Learn More
  6. C&R Dual Pass Heat Exchanger w/ Dual Puller Fans
    $879.00

    For over 25 years, C&R Racing has supplied cooling systems for Champions in NASCAR, IndyCar, NHRA, ALMS, Grand-Am, & SCCA. Now you can experience the same level of quality cooling products, engineered for  your application.Devoloped for the Shelby GT500 we engineered this heat exchanger for maximum performance. We use NASCAR core that has 9 more tubes than our competitor. With features like 2 pass design, dual Spal fans it is no wonder C&R was chosen to be a Tier 1 supplier to Shelby. Comes with fan relays and all mounting hardware. Mounts in factory location. This is a must have performance part. Don't let heat soak steal your engines potential. Learn More
  7. Shelby American Competition Heat Exchanger 2007-2014 GT500 - CR-GT5-FCPR002A
    $1,199.99

    Applications:
    2007-2014 Shelby GT500
    2011-2014 Shelby GT350

    This new heat exchanger features 11" fans to pull even more air across the core than the Extreme Duty Heat Exchanger. Designed by Shelby and C/R, our competition heat exchanger uses a proprietary NASCAR core, which features a single row core with a dual pass system.

    The intercooler and heat exchanger build higher temperatures in normal, spirited or on track driving conditions. With a stock Shelby or Mustang, the car has an on board computer program begins to curb spark and timing at 100 degrees. 100 degrees within the intercooler and heat exchanger can be achieved within minutes of starting the vehicle. After market tuners change this parameter to begin the timing and spark curb trend at 130 degrees to 140 degrees.

    Note:
    Recommended for cars with more than 650hp and cars in hot climates.
    Learn More
  8. VMP SUC021 Dual Fan Triple Pass Heat Exchanger (2005-2014 Mustang)
    $899.99

    Features of the VMP Heat Exchanger:
    Works with Whipple, Kenne Bell, Roush, Magnuson, Edelbrock superchargers
    Works with air-water intercoolers on Vortech centrifugal superchargers
    High efficient triple pass design cools the water three times for lower temps vs. OEM single pass
    Increased HP due to intake temperature drop compared to stock
    Plug and play harness connects inline with the intercooler pump circuit to trigger fan relays
    Drop in intake temp at wide open throttle due to the improved capacity
    Cool-down in the staging lanes possible by running fans and pump
    Quicker cool down in between runs at the track
    Helps prevent heat soak and detonation due to increased intake temps
    Moves the intercooler pump out of the grill for improved airflow
    Simple do-it-yourself bolt on installation
    Increases coolant capacity
    Furnace brazed core (no epoxies) with beautifully tig welded tank construction
    Dual 11" fans provide the ultimate in airflow at all vehicle speeds
    Each unit is pressure-tested before it is shipped.

    Learn More
  9. C&R Competition Dual Pass Heat Exchanger w/ Dual Puller Fans
    $1,259.00

    For over 25 years, C&R Racing has supplied cooling systems for Champions in NASCAR, IndyCar, NHRA, ALMS, Grand-Am, & SCCA. Now you can experience the same level of quality cooling products, engineered for  your application.Devoloped for the 1000 HP Shelby GT500 we engineered this heat exchanger for maximum performance. We use NASCAR core and features like 2 pass design, dual Spal fans it is no wonder C&R was chosen to be a Tier 1 supplier to Shelby. Comes with fan relays and all mounting hardware. Mounts in factory location. This is a must have performance part. Don't let heat soak steal your engines potential. Recommended for 700 HP + or hot climates. Learn More

Grid List

Set Descending Direction
Page:
  1. 1
  2. 2