ZPE 2 Piece Griptec® pulley/system for Vortech Superchargers. This pulley is equipped with Griptec® a micro machining technology. This technology allows the maximum grip force to be applied to the pulley(s) and belt without adversely effecting your drive belt. Our Pulleys and Hubs are made from billet 7075 T6 Aluminum. This grade of Aluminum is much stronger and harder than billet 6061-T6. This gives us a strength similar to steel but with the light weight performance of Aluminum, further we hard anodize our parts for additional protection. This combination gives us the best that each material has to offer in strong light weight and tough component. Our 2 piece system offers some additional features not found on other pulley systems. Our 2 Piece design allows for easy removal and installation in tight spaces. Space constraints are often found on reverse mount systems or small chassis setups. Not all kits have space limitations, there is another great feature our 2 piece systems offers up. That feature is adaptability for unique and custom offsets. Special offsets are often found in supercharger unit upgrades or custom race brackets. We bring the entire line up of Griptec® 2 piece pulleys to be adapted to a easily movable offset in a low cost solution, supporting super-fast production times to help get your supercharge setup aligned and ready for your boost goals. The ZPE 2 piece design will also reduce or even eliminate having to repeatedly deal with key-ways every time when swapping pulleys. When our hub/receiver is mounted it does not need to be removed for pulley swaps. Pulley swaps are easy with 6 easy to change M6 screws. Always use Blue Loctite and use proper install tools to correctly TQ to 6-7 ft-lbs. Pro Install Tips: Before installing you new pulley you may want to verify your pulleys alignment referencing your original pulley with the new Gritpec® Pulley. If you wish to know more about how to do this chose from the Links. Pulley_vs_Pulley_Check.pdf Or Pulley_Vs_Pulley_Check_Video For the Stainless socket cap screws use a 5mm allen wrench. Tq M6 Screws to 6-7 Ft-Lb Do not use impacts for torqueing the pulleys hardware. We recommend a proper calibrated tq wrench. Over torqueing can lead to hardware failure. When swapping multiple pulleys/rings for different setups, inspect the dried Loctite and remove excess cured Loctite before re applying new Loctite. This will ensure that the new Loctite cures and bonds to the screws and hub/receiver. Using a right angle pick, light wire brush or pipe cleaner helps removed buildup of old Loctite. Follow your superchargers recommended TQ spec for the retention bolt or nut. We recommend using Loctite Blue or Red depending on your requirements. Don’t use an impact on the main shaft bolt/nut for the Hub/Receiver over torqueing can cause deformation of the hub or damage your shaft. Other useful info. You can reuse your keyway. For Vortech systems the Keys are usually 3/16 key stock. Some factory pulleys may have only one Key. Our new Receiver is prepped with 2 keys for versions that use 2 keys. This extra Key slot will not affect anything if not being used. Always use Blue Loctite and use proper install tools to correctly TQ to 6-7 ft-lbs. Our Stainless hardware for our M6 thread is a M6x1.0 by14mm length. Our Votech pulleys come standard with our Level 3 Griptec®.Learn More

Vortech 05-06 Mustang GT Supercharger Kit with Aftercooler and V-2 SQ S-Trim(Satin)

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger unit
• High-efficiency bypass valve provides surge-free compressor operation
• High-flow fuel injectors, bypass valve and air filter are among the other components included.
• OEM-type cast aluminum mounting bracketry for "factory installed appearance & rigidity
• Supercharger drive system includes all necessary belts, pulleys & tensioner
• Integrated air-to-water, dual pass charge cooler configuration allows for additional horsepower gains and features a sealed, maintenance-free design.
• Emissions legal in all 50-states (except Real Street systems)
• Vortech 3-year limited warranty

The addition of the V-2 SQ S-Trim supercharger will increase horsepower from 300 to 420 and torque from 320 lb./ft. to 385 lb./ft. at 8.5-9.5 psig at the flywheel

All components needed to bolt the system to a stock vehicle, such as billet aluminum mounting brackets, fuel system upgrades including high-flow replacement injectors, Diablosport Predator, supercharger oil feed and drain, compressor bypass valve and all required fasteners are included. The installation allows retention of all factory accessories including A/C and power steering. This system is available in satin or polished finish. The V-2 supercharger is covered by a three-year limited warranty.

Learn More

Vortech 07-08 GT Supercharger Kit w/V-2 SQ S-Trim(Satin)

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger unit
• High-efficiency bypass valve provides surge-free compressor operation
• High-flow fuel injectors, bypass valve and air filter are among the other components included.
• OEM-type cast aluminum mounting bracketry for "factory installed appearance & rigidity
• Supercharger drive system includes all necessary belts, pulleys & tensioner
• Emissions legal in all 50-states (except Real Street systems)
• Vortech 3-year limited warranty

The addition of the V-2 SQ S-Trim supercharger will increase horsepower from 300 to 420 and torque from 320 lb./ft. to 385 lb./ft. at 8.5-9.5 psig at the flywheel

All components needed to bolt the system to a stock vehicle, such as billet aluminum mounting brackets, fuel system upgrades including high-flow replacement injectors, Diablosport Predator, supercharger oil feed and drain, compressor bypass valve and all required fasteners are included. The installation allows retention of all factory accessories including A/C and power steering. This system is available in satin or polished finish. The V-2 supercharger is covered by a three-year limited warranty.

Learn More

Vortech 05-06 GT Supercharger Kit w/V-2 SQ S-Trim(Satin)

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger unit
• High-efficiency bypass valve provides surge-free compressor operation
• High-flow fuel injectors, bypass valve and air filter are among the other components included.
• OEM-type cast aluminum mounting bracketry for "factory installed appearance & rigidity
• Supercharger drive system includes all necessary belts, pulleys & tensioner
• Emissions legal in all 50-states (except Real Street systems)
• Vortech 3-year limited warranty

The addition of the V-2 SQ S-Trim supercharger will increase horsepower from 300 to 420 and torque from 320 lb./ft. to 385 lb./ft. at 8.5-9.5 psig at the flywheel

All components needed to bolt the system to a stock vehicle, such as billet aluminum mounting brackets, fuel system upgrades including high-flow replacement injectors, Diablosport Predator, supercharger oil feed and drain, compressor bypass valve and all required fasteners are included. The installation allows retention of all factory accessories including A/C and power steering. This system is available in satin or polished finish. The V-2 supercharger is covered by a three-year limited warranty.

Learn More

Vortech 07-08 Mustang GT High Output Supercharger Kit with Aftercooler and V-2 SQ S-Trim(Polished)

The increased boost level, high output supercharger system, features a fully integrated air to water aftercooler approach to charge cooling. Vortech chose the air to water system primarily because it closely maintains the boost level found at the compressor. This system will increase horsepower from 300 to 462 and will increase torque from 320 lb./ft. to 419 lb./ft.*You will be impressed by the seamless integration of the supercharger system and the true supercar performance it delivers. For a list of components included in this kit click here and here. For more information on Vortech supercharging systems give your Lethal Performance Sales Associate a call today!!.

P/N 4FU218-048SQ Polished H.O. Supercharging System with charge cooler for 07-08 Ford Mustang GT

Quality Features:

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Integrated air-to-water, dual pass charge cooler configuration allows for additional horsepower gains and features a closed loop, maintenance-free design
• Fuel management upgrade includes replacement high-flow fuel injectors and replacement high-flow fuel pump for safe, reliable operation
• DiabloSport Predator hand-held programmer to re-flash factory processor plus provides additional functions, such as fuel and timing adjustments, and data logging
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions
• Discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
• 98mm mass air meter housing and DiabloSport MAFiaTM mass air interface allows for extended meter range
• High-flow, reusable air filter
• Billet aluminum mounting bracketry
• High-flow bypass valve provides for surge-free compressor operation
• Supercharger drive system includes all necessary belts and pulleys
• Compatible with factory OBD II engine management systems and 3-year limited warranty
• 50-state emissions legal under CARB EO# D-213-25

Learn More

Vortech 07-08 GT Supercharger Kit w/V-2 SQ S-Trim(Polished)

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger unit
• High-efficiency bypass valve provides surge-free compressor operation
• High-flow fuel injectors, bypass valve and air filter are among the other components included.
• OEM-type cast aluminum mounting bracketry for "factory installed appearance & rigidity
• Supercharger drive system includes all necessary belts, pulleys & tensioner
• Emissions legal in all 50-states (except Real Street systems)
• Vortech 3-year limited warranty

The addition of the V-2 SQ S-Trim supercharger will increase horsepower from 300 to 420 and torque from 320 lb./ft. to 385 lb./ft. at 8.5-9.5 psig at the flywheel

All components needed to bolt the system to a stock vehicle, such as billet aluminum mounting brackets, fuel system upgrades including high-flow replacement injectors, Diablosport Predator, supercharger oil feed and drain, compressor bypass valve and all required fasteners are included. The installation allows retention of all factory accessories including A/C and power steering. This system is available in satin or polished finish. The V-2 supercharger is covered by a three-year limited warranty.

Learn More

Vortech 07-08 Mustang GT High Output Supercharger Kit with Aftercooler and V-2 SQ S-Trim(Satin)

The increased boost level, high output supercharger system, features a fully integrated air to water aftercooler approach to charge cooling. Vortech chose the air to water system primarily because it closely maintains the boost level found at the compressor. This system will increase horsepower from 300 to 462 and will increase torque from 320 lb./ft. to 419 lb./ft.*You will be impressed by the seamless integration of the supercharger system and the true supercar performance it delivers. For a list of components included in this kit click here and here. For more information on Vortech supercharging systems give your Lethal Performance Sales Associate a call today!!.

P/N 4FU218-040SQ Satin H.O. Supercharging System with charge cooler for 07-08 Ford Mustang GT

Quality Features:

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Integrated air-to-water, dual pass charge cooler configuration allows for additional horsepower gains and features a closed loop, maintenance-free design
• Fuel management upgrade includes replacement high-flow fuel injectors and replacement high-flow fuel pump for safe, reliable operation
• DiabloSport Predator hand-held programmer to re-flash factory processor plus provides additional functions, such as fuel and timing adjustments, and data logging
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions
• Discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
• 98mm mass air meter housing and DiabloSport MAFiaTM mass air interface allows for extended meter range
• High-flow, reusable air filter
• Billet aluminum mounting bracketry
• High-flow bypass valve provides for surge-free compressor operation
• Supercharger drive system includes all necessary belts and pulleys
• Compatible with factory OBD II engine management systems and 3-year limited warranty
• 50-state emissions legal under CARB EO# D-213-25

Learn More

Vortech 05-06 Mustang GT Supercharger Kit with Aftercooler and V-2 SQ S-Trim(Polished)

• Vortech gear driven supercharger with SQ technology provides nearly silent operation and unmatched reliability
• Technologically advanced, high-efficiency impeller and housing design developed in Vortech's supercharger test cell
• Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger unit
• High-efficiency bypass valve provides surge-free compressor operation
• High-flow fuel injectors, bypass valve and air filter are among the other components included.
• OEM-type cast aluminum mounting bracketry for "factory installed appearance & rigidity
• Supercharger drive system includes all necessary belts, pulleys & tensioner
• Integrated air-to-water, dual pass charge cooler configuration allows for additional horsepower gains and features a sealed, maintenance-free design.
• Emissions legal in all 50-states (except Real Street systems)
• Vortech 3-year limited warranty

The addition of the V-2 SQ S-Trim supercharger will increase horsepower from 300 to 420 and torque from 320 lb./ft. to 385 lb./ft. at 8.5-9.5 psig at the flywheel

All components needed to bolt the system to a stock vehicle, such as billet aluminum mounting brackets, fuel system upgrades including high-flow replacement injectors, Diablosport Predator, supercharger oil feed and drain, compressor bypass valve and all required fasteners are included. The installation allows retention of all factory accessories including A/C and power steering. This system is available in satin or polished finish. The V-2 supercharger is covered by a three-year limited warranty.

Learn More