Maximum Motorsports 05-09 Mustang Caster Camber Plates

Lowered Mustangs
Lowering your Mustang will cause the top of the front tires to lean in towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with the Maximum Motorsports Caster/Camber Plates. Even a Mustang lowered as much as 2.5 inches can still be aligned to factory specifications.

Bolts on! No drilling or cutting required.

1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.

0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.

Caster and camber are easily adjusted at the top of the strut tower.

The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars. Teflon lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.

High-tech composite thrust bearing transfers the spring load into the strut tower.

All parts are either plated or powder coated for great looks and long lasting protection.

Warranty: Maximum Motorsports Caster/Camber Plates part #Mm5CC-1 have a limited lifetime warranty against spherical bearing failure or plate failure. That's right - If you wear out the spherical bearing, or break the plates while driving, we will replace that component for free. This warranty applies to the original retail purchaser of genuine MM Caster/Camber Plates. Learn More

J&M Products is proud to release our completely redesigned fully adjustable protected under US Patent No. 8,820,759 and patents pending Camber & Caster plate assembly for the 2005-2010 Ford Mustangs. This Camber/Caster kits is the only kit that comes complete READY to bolt in right out of the box (no need to swap anything over from the factory mount). Whether you are using the car for street, autocross, road racing or drag racing these plates are designed for you. These are the only plates that have an offset design allowing for you to install them in the street orientation or a race orientation allowing for the most camber adjustment available compared to any other plate on the market. Just like our other Camber/Caster plates these come with a full lifetime warranty to the original purchaser of the product.

Benefits:

Allows for camber and caster adjustment not available from the factory
Allows you to align your Mustang back to factory specifications even when lowered over 2.5 inches.
Camber & caster are adjustable separately.
Offset design allows for either street use or race use alignments.
Provides for caster adjustment not found on the factory mounts
Caster adjustment to allow correction for OEM production tolerances.
Alignment is easily adjusted at the top of the strut tower.
Spherical bearing eliminates un-wanted deflection and precisely locates the strut shaft during cornering.
Completely assembled and bolts in with no need for extra drilling or cutting.
ONLY kit that includes everything needed to install all the way down to the rubber spring isolator.
Unlike competitors you don’t need to remove parts from the factory mount and install on our mount.

Product Features:

Over 2.5 degrees of camber adjustment, adjustable without affecting caster.
0.7 degrees of range of caster adjustment.
PTFE lined spherical bearing manufactured in the USA.
All parts are either plated or powder coated for great looks and long lasting protection.
Protected under US Patent No. 8,820,759 and patents pending.
Lifetime warranty on the entire camber plate to the original owner.Learn More

QA1 2011 Mustang Caster/Camber Plates

**THESE CC PLATES WILL ONLY WORK WITH QA1 FRONT STRUTS OR QA1 COILOVER KIT. THEY WILL NOT WORK WITH ANY OTHER STRUT INCLUDING THE STOCK ONES**

QA1 once again leads the industry by developing a specifically engineered asymmetric bearing for caster/camber plate applications. Through this innovative design, the bearing allows for improved load distribution that significantly reduces wear and increases durability eliminating "sloppy bearings" which result in road noise and poor handling characteristics.

QA1’s high quality caster/camber plates for race applications offer many features not found in other brands. For example, the bearing housing is tig-welded for the utmost in strength and durability. This kit provides caster and camber changes for the ultimate in adjustability.

Fitment: Will only work with QA1 front struts (part # H2004 or H 2011 ) and QA1 coil over kit (part # MU150, MU175, MU200, MU225 or MU250).

Learn More

Eibach 05-2013 Mustang Pro-Alignment Camber Bolts

 

Footnotes: Camber Bolts 14mm. Front - Camber +/-1.75 Degrees Of Adjustment.

PRO-ALIGNMENT Camber Bolt Kit

• Precision Alignment Camber Bolt Kit for Maximum Performance
• Prevents Uneven Tire Wear
• Wider Range of Camber Adjustment-Suitable for Street or Track Tuning
• One-Year Warranty

After the installation of either an Eibach PRO-KIT, SPORTLINE spring kit or PRO-STREET, R1, R2 coil-over kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear.

Eibach offers a complete range of PRO-ALIGNMENT kits, which provide a simple, affordable solution to correct excessive negative camber. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making an Eibach PRO-ALIGNMENT kit a necessity for the serious performance tuner.

For the extreme lowering of SPORTLINE and PRO-STREET-S, MULTI-PRO-R1/R2 coil-over applications, look for the alignment kits with a greater range of adjustment. These will be listed below the standard PRO-ALIGNMENT kit in the applications section.

Learn More

Correct front alignment and add camber adjustability to the your 2010-2014 S197 Mustang with Camber Bolts from BMR Suspension. The S197 Mustangs have no factory camber adjustability, and once your car is lowered, this can lead to poor handling and premature tire wear. BMR’s Camber Bolts are forged steel bolts, giving you unrivaled strength and precision. The assembly is completed with heavy-duty nuts and locating washers. The BMR Camber Bolts give you 2 degree of camber adjustability in the front of your S197 Mustang. This allows you to achieve the proper camber settings on lowered vehicles, or more aggressive alignment setting for hardcore handling applications.

BMR Suspension designed the FC001 Camber Bolts for street performance, drag race, and handling applications. Each component of the FC001 assembly is precision forged, giving you the ability to make precise alignment changes. The nut/locating washer design allows for unlimited adjustments without have to use new hardware. Whether you drag race, road race, or simply drive your car on the street, BMR’s FC001 is perfect for any car in need of additional front camber.

BMR Suspension’s FC001 camber bolts are available in a durable black zinc finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.

- Fits 2010-2014 S197 Mustang
- Provides 2 degrees of additional camber adjustability
- Allows for proper front alignment on lowered vehicles
- Allows for aggressive alignment settings for autocross and road race applications
- Heavy-duty Hardware for the ultimate in strength
- Heavy-duty nut and locating washer
- Simple bolt-on installation
- Durable black zinc finish
- Proudly designed in the U.S.A.
- Proudly built in the U.S.A.
Learn More

The biggest adjustment range up to +/- 1.75 deg. Unlike other “friction” lock designs we use a positive toothed lock washer which mean NO SLIP. Simple to adjust & lock time after time with out slipping.

 

NOTES:

Adds +/- 1.5º camber

 

Install Instructions

Learn More

2005-2014 Mustang Caster/Camber Kit

Benefits
Eliminates flexible strut mount bushings
Allows adjustments to caster & camber
Increases high speed stability

Use of This Kit Will Resonate Noise
It is not recommended for street use

Features
• Zinc plated bearing plates
• Powder coated lower plates
• Teflon® lined bearings
• Steel bushings & spacers
• Zinc plated bolts, nuts, & washers Learn More

Maximum Motorsports 05-09 Mustang Caster Camber Plates

Lowered Mustangs
Lowering your Mustang will cause the top of the front tires to lean in towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with the Maximum Motorsports Caster/Camber Plates. Even a Mustang lowered as much as 2.5 inches can still be aligned to factory specifications.

Bolts on! No drilling or cutting required.

1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.

0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.

Caster and camber are easily adjusted at the top of the strut tower.

The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars. Teflon lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.

High-tech composite thrust bearing transfers the spring load into the strut tower.

All parts are either plated or powder coated for great looks and long lasting protection.

Warranty: Maximum Motorsports Caster/Camber Plates part #Mm5CC-1 have a limited lifetime warranty against spherical bearing failure or plate failure. That's right - If you wear out the spherical bearing, or break the plates while driving, we will replace that component for free. This warranty applies to the original retail purchaser of genuine MM Caster/Camber Plates. Learn More