Specifications:
Exhaust System Type: Cat-Back
Exhaust Tubing Material: Stainless Steel
Exit Location: Split Rear
Main Tubing Diameter: 3"
Exhaust System Sound: Aggressive / Loud
No Tip (Uses Factory Valance)

Features:
Horsepower and Torque Increased by 7 – 10%
Increased exhaust flow for better performance
Better fuel economy at cruising speeds
The most aggressive sound of any Borla system
Custom designed for each application
Patented straight-through, multi-core muffler design reduces backpressure while absorbing sound waves
Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed
Made from the finest austenitic stainless steel for long-lasting durability
All welded construction
Includes everything required for installation, including detailed instructions
Backed by the exclusive Borla Million-Mile warranty
Proudly made in the USA

Includes:
Connecting Pipes
Mufflers
Hardware
Active Exhaust Valves
Learn More

Features:
Horsepower and Torque Increased by 7 – 10%
Increased exhaust flow for better performance
Better fuel economy at cruising speeds
The most aggressive sound of any Borla system
Custom designed for each application
Patented straight-through, multi-core muffler design reduces backpressure while absorbing sound waves
Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed
Made from the finest austenitic stainless steel for long-lasting durability
All welded construction
Includes everything required for installation, including detailed instructions
Backed by the exclusive Borla Million-Mile warranty
Proudly made in the USA

Includes:
Connecting Pipes
Mufflers
Hardware
Learn More

Key Features
Sounds Great With An Aggressive Tone
Drone Free Exhaust System
Fully Mandrel-Bent 2.75" Tubing
Gain Horsepower & Torque!
Made From Premium T304 Stainless Steel
Features 4.5" Pro Series Exhaust Tips
Limited Lifetime Warranty!
Learn More

Key Features
Sounds Great With An Aggressive Tone
Drone Free Exhaust System
Fully Mandrel-Bent 2.75" Tubing
Gain Horsepower & Torque!
Made From Premium T304 Stainless Steel
Features 4.5" Black Pro Series Exhaust Tips
Limited Lifetime Warranty!
Learn More

Description
Fits ALL Dodge Charger Challenger, Chrysler 300C 6.1L / 6.4L And 6.2L HellCat Applications
Gain 20+ Horsepower and Improve Sound
Large 1-7/8" Primaries for Maximum Flow
Direct Bolt On with Matching Mid pipe Kit (Sold Separately)
Includes All Required Hardware and Gaskets
Nickel Chrome Finish
Better Exhaust Flow = More Power
Increase the horsepower output of your 2006-2019 Dodge Challenger, Charger SRT8 or HellCat 6.2L along with other 6.1L and 6.4L HEMI powered cars with these BBK Performance full length headers. BBK Performance full length headers will increase your exhaust flow giving you additional horsepower and torque. These full length headers will help give your engine a throaty exhaust note.

Designed for Maximum Performance
BBK Performance full length headers are made from 1-7/8" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. The full length primary tube design creates unrestricted airflow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance on your Hemi powered modern muscle car.

Easy Installation
When used with the matching midpipes these headers will connect to factory or aftermarket exhaust midpipes, making them a great fit with stock or aftermarket catback exhaust kits.

Emissions Information
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.It cannot be sold or shipped to any California resident or addressee.

Fits
2006-2019 Dodge Charger SRT8 6.1L or 6.4L V8
2015-2019 HellCat 6.2L V8 Applications
2008-2019 Dodge Challenger SRT8 6.1L or 6.4L V8
2005-2019 Chrysler 300C SRT8 6.1L or 6.4L V8
2005-2019 Dodge Magnum SRT8 6.1L or 6.4L V8
Please Note: Requires the use of Short Mid Pipes Part#16481 - With High Flow Catalytic Converters or Part#16482 - Off Road - Race Only version

Requires O2 Harness Extensions See Below
Part#1114 Hell Cat 6.2L Front O2 Harness Extension 6pin 12"
Part#11181 Hell Cat 6.2L Rear O2 Harness Extension 4pin 24"
Part#1118 Dodge 6.1L 6.4L Front O2 Harness Extension 4pin 12"
Part#11181 Dodge 6.1L 6.4L Rear O2 Harness Extension 4pin
Learn More

Description
Fits All Dodge Challenger, Charger 6.1L and 6.4L and Hellcat 6.2L applications when Installing BBK Long Tube Headers Part# 1648 and 16480
3.0" High Flow Catalytic Converters for Enhanced Exhaust Flow
Mandrel Bent Aluminized Steel Tubing
Pipes Reduce down to factory size to make installation to factory exhaust system a snap
O2 Sensor Locations Installed
Offers a good aggressive sound and improved horsepower and torque - a perfect combination with the BBK Performance Long tubes for added horsepower and performance
Required To Complete Your Long Tube Header Install
Connect the BBK Headers on your 2015-2019 Dodge Challenger Charger to the rest of the exhaust system with this BBK Performance 3.0" high flow catted mid-pipe kit. Combined with the added flow from your headers, this BBK Performance mid pipe will dramatically increase the sound of your HEMI Powered car to a roar that will be sure to turn heads.

Easy Installation
The mid pipes come with oxygen sensor bungs to make installation a breeze - however O2 extension harnesses are required. While not always necessary, a handheld tuner is recommended. Because of the sensitive electronics on newer models, even midpidpes using high flow cats can sometimes cause a catalyst under-temp code a tune will be required.

Maximum Exhaust Flow
High flow catalytic converters are used for better exhaust flow. This mid-pipe is designed with mandrel bent aluminized steel for great exhaust flow. This part is not legal for use in California or any state that has adopted California emissions standards. Please check your state and local emissions laws to ensure compliance.

Emissions Information
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
It cannot be sold or shipped to any California resident or addressee.
Fits
2015-2019 Dodge Challenger, Charger 6.1L / 6.4L and Hellcat 6.2L
Learn More

Description
Fits ALL Dodge Charger Challenger, Chrysler 300C 6.1L / 6.4L And 6.2L HellCat Applications
Gain 20+ Horsepower and Improve Sound
Large 1-7/8" Primaries for Maximum Flow
Direct Bolt On with Matching Mid pipe Kit (Sold Separately)
Includes All Required Hardware and Gaskets
Polished Silver Ceramic
Better Exhaust Flow = More Power
Increase the horsepower output of your 2006-2019 Dodge Challenger, Charger SRT8 or HellCat 6.2L along with other 6.1L and 6.4L HEMI powered cars with these BBK Performance full length headers. BBK Performance full length headers will increase your exhaust flow giving you additional horsepower and torque. These full length headers will help give your engine a throaty exhaust note.

Designed for Maximum Performance
BBK Performance full length headers are made from 1-7/8" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. The full length primary tube design creates unrestricted airflow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance on your Hemi powered modern muscle car.

Easy Installation
When used with the matching midpipes these headers will connect to factory or aftermarket exhaust midpipes, making them a great fit with stock or aftermarket catback exhaust kits.

Emissions Information
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.It cannot be sold or shipped to any California resident or addressee.

Fits
2006-2019 Dodge Charger SRT8 6.1L or 6.4L V8
2015-2019 HellCat 6.2L V8 Applications
2008-2019 Dodge Challenger SRT8 6.1L or 6.4L V8
2005-2019 Chrysler 300C SRT8 6.1L or 6.4L V8
2005-2019 Dodge Magnum SRT8 6.1L or 6.4L V8
Please Note: Requires the use of Short Mid Pipes Part#16481 - With High Flow Catalytic Converters or Part#16482 - Off Road - Race Only version

Requires O2 Harness Extensions See Below
Part#1114 Hell Cat 6.2L Front O2 Harness Extension 6pin 12"
Part#11181 Hell Cat 6.2L Rear O2 Harness Extension 4pin 24"
Part#1118 Dodge 6.1L 6.4L Front O2 Harness Extension 4pin 12"
Part#11181 Dodge 6.1L 6.4L Rear O2 Harness Extension 4pin
Learn More

Designed to replace the stock manifolds and mate directly to your factory catalytic converters, significantly improving your performance and efficiencies. Features 1-7/8” .065 wall thickness primaries with merge style collectors and scavenger spikes, ARH Race Manifolds are 100% USA Manufactured and come with a with lifetime warranty.

American Racing Headers is proud to announce our New CARB Legal #D-693-2 Hemi Race Manifold for the following vehicles:
2015 -2019 Dodge Challenger/Charger 6.4
2015 -2019 Dodge Challenger/Charger 6.2 Hellcat
2018 Challenger 6.2 Demon

ALL American Racing Headers Exhaust Systems are for OFF-ROAD use only.

Product features on this system includes:
100% Made in the USA - Never Outsourced
Made entirely of 304 stainless steel
3/8" thick laser-cut flanges for a warp-free seal
Hand-ported TIG welded inlets
Optimized primary tube routing for superior fit and performance
Merge collectors with scavenger spikes
Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability

Learn More