Affirm Payments
Buy with monthly payments Get a real-time decision.
My Cart

You have no items in your shopping cart.

Grid List

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  1. BMR DSL111R Front Driveshaft Safety Loop-Red (2015+ Dodge Challenger Hellcat And Demon)
    $199.95

    BMR DSL111R Front Driveshaft Safety Loop - Red (2015+ Dodge Challenger Hellcat And Demon)Learn More
  2. Driveshaft Shop 2000HP Full Chromoly Level 5 Direct Bolt-In Axles - Pair (2015+ Dodge Demon / Hellcat / SRT8) - RA7288X5/RA7288X5
    $2,249.96

    Now available from The Driveshaft Shop, the new 2000HP Hellcat/SRT8 axles! If you want the very best and strongest axle available for this platform, this is it. The inner and outer CV have been developed to use a modified Porsche style 108mm CV that uses fully REM polished internals. Our torsional 300M Chromoly axle bars have been used in every record-breaking IRS car out today. Inner and outer CV’s are our new 2-piece billet flanges with a 300M spline section to fit into the differential and wheel hubs. They do not come with the ABS / Tone rings on them but are machined for you to easily transfer over the rings from your stock axles. They are a direct bolt-in and there are no modifications needed for installation.

    Warranty: 1-Year

    PART# RA7288X5/RA7288X5Learn More
  3. Driveshaft Shop CHSH38-A 2015+2015 LX Charger Hellcat Automatic 4'' Aluminum 1-Piece Direct Fit CV Driveshaft (Supercedes CHSH31-A-CV)
    $1,247.98

    Product Description
    New from The Driveshaft Shop! We have developed a DIRECT FIT rear CV Driveshaft! This new design eliminates the adapter plate at the rear end with a precision ground CV to fit inside the pinion flange just like the factory. This new design sheds weight from adapter plates while increasing power holding ability and drivetrain response. Our driveshaft will be an athletic upgrade from the factory soft rubber mounted shaft. Now offering solid connections, perfect alignment, and our new CV’s with chromoly internals to get the power to the ground. Designed to hold over 1000+ horsepower, so even the most extreme engine modifications won't be a problem.

    * 4" diameter aluminum construction.
    * Billet aluminum endcaps.
    * 300M Chromoly spline plugs.
    * High-speed precision ground CV joint with chromoly internals. Has twice the range of the previous design.
    * 1000+ hp Rating.
    * Balanced on our 9500 rpm high-speed balancer
    * Comes complete with all high-grade hardware (not more bent Giubo bolts)
    * 1-year warranty.

    Please Note:
    - This driveshaft for 2015+ models DOES NOT REQUIRE SPACERS
    - Exhaust system may need to be modified for adequate clearance (.75”)
    * WILL NOT FIT SRT/Scat Pack Models

    Part Number: CHSH38-ALearn More
  4. DSS CHSH32-C-CV 2015+ Challenger Hellcat / Demon Automatic 3.25" Carbon Fiber Driveshaft
    $1,574.99

    Out of stock

    Quick Overview
    Please Note:
    * This driveshaft for 2015+ models DOES NOT REQUIRE SPACERS
    * Exhaust system may need to be modified for adequate clearance (.75”)
    * WILL NOT FIT SRT/Scat Pack Models

    Product Description
    This single shaft is the same basic design that we have been using in most modern muscle cars for the last 2 years and is a proven and trouble-free shaft for the Challenger Scat Pack / SRT / SRT392. This shaft will replace the stock 2-piece shaft and eliminate the disconnected feeling you get from the stock shaft with its Giubo (rubber drive) and soft hanger bearing rubber. The stock shaft has to have the Giubos twist, then the hanger bearing moves up and only after all this happens the car will start to move. With this New Redesigned Carbon Fiber driveshaft that uses a Custom CV assembly NOW on both ends, will make the car feel more connected or more athletic. The response from the gas pedal will be more responsive and will increase 60ft times at the track. This is balanced like all shafts on our 9500rpm balancer so you know it’s done to the best standards available today.

    * Custom 108mm CV's with high speed boot and special grease. NOW ON BOTH ENDS!
    * Spline made from 300m and installed into aluminum head for superior strength and light weight
    * Balanced on our high-speed machine
    * Comes complete with all high-grade hardware (not more bent Giubo bolts)
    * Rated for 1000hp +
    * 1-year warranty.
    * 30lbs

    Please Note:
    - This driveshaft for 2015+ models DOES NOT REQUIRE SPACERS
    - Exhaust system may need to be modified for adequate clearance (.75”)
    * WILL NOT FIT SRT/Scat Pack Models

    Part Number: CHSH32-C-CVLearn More
  5. DSS CHSH38-C DODGE 2015 LX Charger Hellcat Automatic 3.8" Carbon Fiber Direct Fit 1-Piece Driveshaft (Supercedes CHSH31-C-CV)
    $2,160.20

    Product Description
    New from The Driveshaft Shop! We have developed a DIRECT FIT rear CV Driveshaft! This new design eliminates the adapter plate at the rear end with a precision ground CV to fit inside the pinion flange just like the factory. This new design sheds weight from adapter plates while increasing power holding ability and drivetrain response. Our driveshaft will be an athletic upgrade from the factory soft rubber mounted shaft. Now offering solid connections, perfect alignment, and our new CV’s with chromoly internals to get the power to the ground. Designed to hold over 1000+ horsepower, so even the most extreme engine modifications won't be a problem.

    * 3.8" diameter carbon fiber construction.
    * Billet aluminum endcaps.
    * 300M Chromoly spline plugs.
    * High-speed precision ground CV joint with chromoly internals. Has twice the range of the previous design.
    * 1000+ hp Rating.
    * Balanced on our 9500 rpm high-speed balancer
    * Comes complete with all high-grade hardware (not more bent Giubo bolts)
    * 1-year warranty.

    Please Note:
    - This driveshaft for 2015+ models DOES NOT REQUIRE SPACERS
    - Exhaust system may need to be modified for adequate clearance (.75”)
    * WILL NOT FIT SRT/Scat Pack Models

    Part Number: CHSH38-CLearn More
  6. QA1 JJ-23206 Rev Series Carbon Fiber Driveshaft - Non SFI (2015-2019 Challenger RT / 392 / SCAT Auto)
    $2,364.95

    These bolt-in REV Series carbon fiber driveshafts are designed and wound specifically for Challenger SRT Hellcats with up to 1500 HP and a max rated torque of 1000 lb ft. They feature the same high quality materials and benefits as the rest of our REV Series driveshafts.

    QA1's Challenger Hellcat driveshafts feature Spicer Life Series 1350 U-joints, and utilize a high speed CV joint with a high speed sealing boot and high temp grease. This high speed capability allows us to minimize effects of NVH while increasing performance. They also offer a 27% weight savings over stock two-piece driveshafts, while their 3.3" diameter tube provides better clearance for exhaust systems.

    What makes QA1's driveshaft the best?
    -A truly engineered system from transmission to rear end
    -Extended transmission and differential life
    -Quicker acceleration
    -More power to the ground
    -NVH testing helps minimize driveline vibrations
    -Balanced as an assembly without the use of welded or bonded weights, ensuring a precise and more reliable balance
    -Lighter and stronger than steel, aluminum, and other carbon fiber driveshafts
    -Safer than steel and aluminum driveshafts
    -Proudly wound in-house using 3M Matrix Resin in QA1's Lakeville, Minnesota facility

    NOTE: Challenger Hellcat driveshafts are designed for stock vehicles. Any modifications can affect fitment. Please refer to the length specifications from the tube end to the CV joint to confirm that the driveshaft will have the correct fitment for your vehicle.Learn More
  7. QA1 JJ-23204 Rev Series Carbon Fiber Driveshaft - SFI (2015-2019 Challenger RT / 392 / SCAT Auto)
    $2,364.95

    These bolt-in REV Series carbon fiber driveshafts are designed and wound specifically for Challenger SRT Hellcats with up to 1500 HP and a max rated torque of 1000 lb ft. They feature the same high quality materials and benefits as the rest of our REV Series driveshafts.

    QA1's Challenger Hellcat driveshafts feature Spicer Life Series 1350 U-joints, and utilize a high speed CV joint with a high speed sealing boot and high temp grease. This high speed capability allows us to minimize effects of NVH while increasing performance. They also offer a 27% weight savings over stock two-piece driveshafts, while their 3.3" diameter tube provides better clearance for exhaust systems.

    What makes QA1's driveshaft the best?
    -A truly engineered system from transmission to rear end
    -Extended transmission and differential life
    -Quicker acceleration
    -More power to the ground
    -NVH testing helps minimize driveline vibrations
    -Balanced as an assembly without the use of welded or bonded weights, ensuring a precise and more reliable balance
    -Lighter and stronger than steel, aluminum, and other carbon fiber driveshafts
    -Safer than steel and aluminum driveshafts
    -Proudly wound in-house using 3M Matrix Resin in QA1's Lakeville, Minnesota facility

    NOTE: Challenger Hellcat driveshafts are designed for stock vehicles. Any modifications can affect fitment. Please refer to the length specifications from the tube end to the CV joint to confirm that the driveshaft will have the correct fitment for your vehicle.Learn More
  8. QA1 JJ-23203 Rev Series Carbon Fiber Driveshaft - SFI (2015-2019 Challenger Hellcat /392 / RT / SCAT Manual)
    $2,364.95

    These bolt-in REV Series carbon fiber driveshafts are designed and wound specifically for Challenger SRT Hellcats with up to 1500 HP and a max rated torque of 1000 lb ft. They feature the same high quality materials and benefits as the rest of our REV Series driveshafts.

    QA1's Challenger Hellcat driveshafts feature Spicer Life Series 1350 U-joints, and utilize a high speed CV joint with a high speed sealing boot and high temp grease. This high speed capability allows us to minimize effects of NVH while increasing performance. They also offer a 27% weight savings over stock two-piece driveshafts, while their 3.3" diameter tube provides better clearance for exhaust systems.

    What makes QA1's driveshaft the best?
    -A truly engineered system from transmission to rear end
    -Extended transmission and differential life
    -Quicker acceleration
    -More power to the ground
    -NVH testing helps minimize driveline vibrations
    -Balanced as an assembly without the use of welded or bonded weights, ensuring a precise and more reliable balance
    -Lighter and stronger than steel, aluminum, and other carbon fiber driveshafts
    -Safer than steel and aluminum driveshafts
    -Proudly wound in-house using 3M Matrix Resin in QA1's Lakeville, Minnesota facility

    NOTE: Challenger Hellcat driveshafts are designed for stock vehicles. Any modifications can affect fitment. Please refer to the length specifications from the tube end to the CV joint to confirm that the driveshaft will have the correct fitment for your vehicle.Learn More
  9. QA1 JJ-23201 Rev Series Carbon Fiber Driveshaft - Non SFI (2015-2019 Challenger Hellcat /392 / RT / SCAT Manual)
    $2,364.95

    These bolt-in REV Series carbon fiber driveshafts are designed and wound specifically for Challenger SRT Hellcats with up to 1500 HP and a max rated torque of 1000 lb ft. They feature the same high quality materials and benefits as the rest of our REV Series driveshafts.

    QA1's Challenger Hellcat driveshafts feature Spicer Life Series 1350 U-joints, and utilize a high speed CV joint with a high speed sealing boot and high temp grease. This high speed capability allows us to minimize effects of NVH while increasing performance. They also offer a 27% weight savings over stock two-piece driveshafts, while their 3.3" diameter tube provides better clearance for exhaust systems.

    What makes QA1's driveshaft the best?
    -A truly engineered system from transmission to rear end
    -Extended transmission and differential life
    -Quicker acceleration
    -More power to the ground
    -NVH testing helps minimize driveline vibrations
    -Balanced as an assembly without the use of welded or bonded weights, ensuring a precise and more reliable balance
    -Lighter and stronger than steel, aluminum, and other carbon fiber driveshafts
    -Safer than steel and aluminum driveshafts
    -Proudly wound in-house using 3M Matrix Resin in QA1's Lakeville, Minnesota facility

    NOTE: Challenger Hellcat driveshafts are designed for stock vehicles. Any modifications can affect fitment. Please refer to the length specifications from the tube end to the CV joint to confirm that the driveshaft will have the correct fitment for your vehicle.Learn More

Grid List

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3