AFE 2010 6.2L Camaro SS Stage 2 Cold Air Intake (Pro Dry S)

This performance cold air intake system picks up 10 Hp at 4,300 RPM, 12 lbs x ft of torque at 4,000 RPM and increases airflow by 35% over stock. Features a massive air filter for the highest possible air flow, a one-piece, powdercoated heat shield to keep out hot engine air, and optimized MAF sensor positioning for trouble free installation. Installs in 30-45 minutes with no cutting or drilling required.

AFE (advanced FLOW engineering) offers you a better choice of oil-free filters: New Pro Dry S synthetic dry-media filters. Pro Dry S filters use a revolutionary two-ply synthetic material that is functionally superior to traditional paper media and single-ply synthetic, and easy to service.

Pro Dry S dry-media filters increase airflow providing improved horsepower, torque, and fuel economy with 99.4%* filtration efficiency. Perhaps the greatest benefit of new Pro Dry S filters is the convenience of servicing these oil-free filters.

To clean a Pro Dry S filter lightly tap it on the ground, vacuum it, or wash with soap and water. Solvents and oiling are not necessary. Pro Dry S dry-media filters by aFe are now available for most popular car, pickup trucks and SUV's.

Product Features:
 

• Oil-free, 2-layer synthetic media for the AFE Pro Dry S Synthetic Dry Filter
• Better airflow means more power for your car, truck or SUV
• Increase horsepower, torque, and fuel economy
• AFE Pro Dry S Synthetic Dry Filter is backed by a Limited lifetime warranty

Learn More

AFE 2010 6.2L Camaro SS Stage 2 Cold Air Intake (Pro 5 R)

This performance cold air intake system picks up 10 Hp at 4,300 RPM, 12 lbs x ft of torque at 4,000 RPM and increases airflow by 35% over stock. Features a massive air filter for the highest possible air flow, a one-piece, powdercoated heat shield to keep out hot engine air, and optimized MAF sensor positioning for trouble free installation. Installs in 30-45 minutes with no cutting or drilling required.

These aFe Pro 5R washable/reusable cotton air filters are made from high-quality materials to ensure a tight seal without gaskets or sealants. They're available in a variety of shapes and sizes and outflow any other filter on the market. Since air moving in a straight line flows faster, these filters can actually improve airflow and fuel economy.

Learn More

AFE Sealed Intake (2016-2019 Chevrolet Camaro L4-2.0L (t)) - 50-40007D

Momentum ST Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

AFE Sealed Intake (2016-2019 Chevrolet Camaro L4-2.0L (t)) - 50-40007R

Momentum ST Cold Air Intake System w/ Pro 5R Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

AFE Open Element Intake (2012-2015 Chevrolet Camaro V6-3.6L) - 51-12022

Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

AFE Open Element Intake (2010-2011 Chevrolet Camaro ) - 51-12382

Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

AFE Sealed Intake (2016-2019 Chevrolet Camaro V6-3.6L) - 51-74211

Momentum GT Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

AFE Sealed Intake (2016-2019 Chevrolet Camaro L4-2.0L (t)) - 51-74212

Momentum GT Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More