{"product_id":"isc-suspension-basic-coilover-kit-track-race-with-triple-s-upgraded-coilover-springs-2017-2023-3-isc-t-202b-t-ts","title":"ISC Suspension Basic Coilover Kit Track\/Race With Triple S Upgraded Coilover Springs (2017-2023 3) - ISC-T-202B-T-TS","description":"ISC Suspension Basic Coilover Kit Track\/Race With Triple S Upgraded Coilover Springs (2017-2023 3) - ISC-T-202B-T-TS\u003cbr\u003e\u003cbr\u003eSimplified Performance For The Street Enthusiast. The ISC V2 Basic coilover has all the great features of the ISC V2 N1  but has rubber isolated top mounts instead of a camber plate\/pillowball application in the front. Many street enthusiasts may not need to have adjustable camber plates  so the ISC V2 Basic was made in order to simplify the product and eliminate any feature that may not be used for your average street car that is not going for track performance or aggressive camber\/stance. This also allows us to offer the ISC V2 Basic coilover at a lower price point to our customers without sacrificing quality. The ISC V2 Basic coilover features a Limited Lifetime Warranty to the original owner. Our Coilovers are a single cylinder monotube design  with 32 way adjustable damping to dial in ride quality and performance to your preference. Preload adjustment is separate from ride height adjustment on all of our coilovers  this allows the vehicle to be lowered  without sacrificing ride quality. Our springs are made from SAE9254 steel  dyno tested over 500 000 times with under 5% deformation. Select ISC V2 Basic coilovers are also compatible with our ISC Triple S upgraded coilover springs for additional customization and performance. All ISC coilovers are ISO and ARTC Certified. New features for the ISC V2 Basic Coilover include: New V2 Adjustable End links: When applicable our V2 N1 and V2 Basic kits will include updated adjustable end links (check application guide to determine adjustable end link eligibility) Spring Perch Isolator Pads: Revised hardened spring perch isolator pads reduce friction  allowing for more efficient preload adjustment and a longer product lifespan. Other New Features: Copper based anti-seize lubricant now included for coilover setup\/installation\u003cbr\u003e ISC Coilover Covers are now included with every coilover kit we offer. Our 3mm neoprene protective covers will help shield your coilovers from the elements and allow for seamless height adjustment for years to come. Whether you have a dedicated track car  or a daily driver  the ISC coilover covers will help protect your investment.\u003cbr\u003e\u003cbr\u003ePillowball Upper mounts: For optimal performance pillowball upper mounts are available on most ISC N1 coilovers (see application guide for specifics)\u003cbr\u003e Ride Height Adjustable: Full length height adjustability of up to 3 inches on most applications  High quality T6061 aluminum alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force\u003cbr\u003e Bound Adjustable with Separate Spring Locks\u003cbr\u003e Preload is separate from ride height  the lower you go  the ride quality stays the same\u003cbr\u003e The ISC Triple S Upgraded Coilover Spring kit have springs made of high tensile steel  allowing for increased spring stroke  and better performing ride by having less coils per spring when compared to a standard coilover spring\u003cbr\u003e They are about 20% lighter than a standard steel coilover spring  a great upgrade for both street and track cars\u003cbr\u003e Certifications: ISO9001  2000R Certified and ARTC Certified\u003cbr\u003e Warranty: ISC Suspension offers a LIFETIME WARRANTY to the original purchaser against defects in workmanship and material. For more info on this please refer to ISC Warranty\u003cbr\u003e Thrust Bearing: Thrust bearings help to eliminate the chance of spring bind\u003cbr\u003e a common side effect of running aftermarket coilovers\u003cbr\u003e Front Camber Plates: When your vehicle suspension geometry allows (vehicle specific  please check our application guide)  all ISC N1 coilovers come with adjustable camber plates as standard\u003cbr\u003e Up to 3 degrees of camber adjustment\u003cbr\u003e T6061 anodized aluminum top plate\u003cbr\u003e Piston Design: 32-way adjustable dampening  Shafts are valved according to the spring rate  Shock dyno is used to ensure quality and consistent results\u003cbr\u003e Single Cylinder Design: Monotube damper with high pressure nitrogen  Larger cylinder and piston design to advance driving stability and dexterity  Threaded portion of shaft is powder coated then salt spray coated for optimum durability\u003cbr\u003e We suggest also using anti seize or other protective products when you install your coilovers for even further protection from the elements if you are exposed to snow and salt\u003cbr\u003e ISC Springs: Made from high quality SAE 9254 steel  Dyno tested over 500 000 times on compression inspection with less than 5% deformation\u003cbr\u003e Fully customizable spring rates (spring rates vary depending on application  custom spring rates are available)\u003cbr\u003e\u003cbr\u003eWe offer high performance suspension kits\u003cbr\u003e suspension control arms\u003cbr\u003e lowering springs and wheel accessories for all sorts of makes and models ranging from Acura\u003cbr\u003e BMW\u003cbr\u003e Chevy\u003cbr\u003e Ford\u003cbr\u003e Honda\u003cbr\u003e Hyundai\u003cbr\u003e Lexus\u003cbr\u003e Mazda\u003cbr\u003e Mitsubishi\u003cbr\u003e Nissan\u003cbr\u003e Subaru\u003cbr\u003e Toyota\u003cbr\u003e Volkswagen and more!\u003cbr\u003e\u003cbr\u003e","brand":"ISC Suspension","offers":[{"title":"Default Title","offer_id":48148727562498,"sku":"ISC-T-202B-T-TS","price":1421.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/T-202B_1_3.jpg?v=1785017295","url":"https:\/\/www.lethalperformance.com\/products\/isc-suspension-basic-coilover-kit-track-race-with-triple-s-upgraded-coilover-springs-2017-2023-3-isc-t-202b-t-ts","provider":"Lethal Performance","version":"1.0","type":"link"}