{"product_id":"aem-v3-1-gallon-water-methanol-injection-kit-internal-map","title":"AEM V3 WATER\/METHANOL INJECTION KIT","description":"\u003cstrong\u003ePRODUCT DESCRIPTION\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eV3 Water\/Methanol Injection Kit, Standard Controller - Internal MAP with 35psi max, 200psi WM Pump, 1 Gallon Reservoir, Conductive Fluid Level Sensor\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRobust, Easy to Use Controller Designs\u003cbr\u003eThe new controller designs (Boost Dependent Kit PN 30-3300 \u0026amp; Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSimplified Wiring\u003c\/strong\u003e\u003cbr\u003eAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eIntegrated Boost Safe Feature\u003c\/strong\u003e\u003cbr\u003eThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeavy-Duty High Pressure Injection Pump\u003c\/strong\u003e\u003cbr\u003eAEM’s internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow-Profile 1 Gallon Tank\u003c\/strong\u003e\u003cbr\u003eAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1 gallon tank. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMachined Billet Injectors and Nozzles\u003c\/strong\u003e\u003cbr\u003eAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engine’s horsepower output. Click the link for a Nozzle Flow Guide graph.\u003cstrong\u003eRevised Flow Control Strategy for More Linear Fluid Delivery\u003c\/strong\u003e\u003cbr\u003eAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003cbr\u003eBoost Dependent and Multi-Input (0-5v\/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs\u003cbr\u003eWiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on\/off fluid solenoid\u003cbr\u003e“Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water\/Methanol Failsafe Device)Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable\u003cbr\u003ePrecision-machined billet-aluminum injector with integral check valve\u003cbr\u003eThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc\/min, 500 cc\/min \u0026amp; 1,000cc\/min)\u003cbr\u003e1 gallon tank with integral conductive low-fluid sensor and positive lock connector (tank-less systems available)\u003cbr\u003e20 feet of injection tubing included\u003cbr\u003eLED dash light for system status and low fluid warning\u003cbr\u003e\u003c\/strong\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":47076914168066,"sku":"AEM30-3300","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/0618\/0354\/files\/e5e01e66a17914667e4084997369dbc7.jpg?v=1784940009","url":"https:\/\/www.lethalperformance.com\/products\/aem-v3-1-gallon-water-methanol-injection-kit-internal-map","provider":"Lethal Performance","version":"1.0","type":"link"}