Call us for help 1.877.253.8425 or 1.561.753.8105
Nolathane REV211.0002 Front Engine Mount fits Jeep Wrangler 87-95. Nolathane's gearbox steady mount effectively reduces gearbox movement under acceleration and radically reduces idle vibration.
As the preferred brand by automotive mechanics and DIY'ers (Do it Yourself), Nolathane has achieved this through advancements in both material formulations, high quality raw materials, application engineering and comprehensive testing. As a result these products are a no compromise solution backed up by a Limited Lifetime Warranty.
Why Nolatane?
Whether you intend to restore your street machine, toughen your truck or simply upgrade your daily, suspension bushings are the link between your vehicle and it's springs, struts and shock absorbers. Suspension bushings provide the movement and/or mounting points in your vehicle's suspension system.
Original rubber suspension bushings are compressed or chemically bonded to the suspension components in which they are installed. In the case of a metallastic (steel cased) bush, the rubber is compressed at the time of manufacture and chemically bonded to the metal center sleeve and outer steel shell.
The rubber bush is normally press-fitted into the suspension component such as a control arm, then bolted to the chassis. In this way, the capacity for suspension movement or rotation is restricted. The rubber suspension bush design requires delicate compromise, as it must be soft enough to permit sufficient rotational movement whilst maintaining alignment settings.
Unlike rubber, Nolathane polyurethane suspension bushings are not bonded by compression. Nolathane bushings are mechanically fitted with minimal crush of the urethane material, and the center pin is lubricated so the component freely pivots without restriction. Combined with Nolathane's ability to maintain the bush shape, this free pivoting provides sharper handling response and greatly increased suspension control.
Technical developments in suspension design have provided many of today's vehicles much improved on-road handling. Using Nolathane suspension bushings ensures there is no weakness in the suspension and therefore maintains steering control.
Nolathane bushings bring the following improvements to your suspension:
The Result:
Nolathane was originally designed to replace brass bushings in vehicles competing in hillclimb events. Therefore the early formulation was very hard, as it was designed to replace brass, not rubber. Whilst it was great for competition use it was too harsh for normal street use.
Over the years, just like vehicle and suspension system designs, things have changed. Today Nolathane is manufactured in various durometers (grades of softness / hardness), with the correct durometer selected for each application. Today's Nolathane formulations have higher resistance to tear, abrasion and compression whilst being softer than the original formulations!
| Model | Year(s) |
|---|---|
| Jeep Wrangler | 2002 2003 2004 |
| Jeep Wrangler Laredo | 2002 2003 2004 |
| Jeep Wrangler Sport | 2002 2003 2004 |
| Jeep Wrangler Islander | 2002 2003 2004 |
| Jeep Wrangler S | 2002 2003 2004 |
| Jeep Wrangler Sahara | 2002 2003 2004 |
| Jeep Wrangler Renegade | 2002 2003 2004 |
| Jeep Wrangler SE | 2002 2003 2004 |
| Jeep Wrangler Rio Grande | 2002 2003 2004 |
