Details
Maximum Motorsports IRS Urethane Rear Differential Bushing (Rear urethane bushing with removal tool)
Rear Differential Bushing: MMIRSB-46
For those who have replaced their front differential bushings with urethane, but still have the stock rubber rear bushing, we offer the rear bushing by itself.Includes the tool to easily remove the stock rubber bushing from its mounting bracket.
Reduce wheel hop by installing stiffer differential mounting bushings. MM offers two types of differential bushings, urethane and aluminum. The urethane bushings are much stiffer than the original rubber, yet are still compliant enough to dampen NVH (Noise, Vibration and Harshness). The aluminum bushings allow no deflection at all, and therefore do more to reduce wheel hop. The aluminum bushings are designed to provide adjustment of the pinion angle. Properly setting the pinion angle helps keep driveline vibrations to a minimum.
Unlike many others who offer only the front differential bushings, Maximum Motorsports took the time and effort to actually analyze the IRS system. The MM Engineering Team realized that all of the differential bushings must be replaced as a set. The complete set includes the two front bushings and the essential single rear bushing. If only the front bushings are replaced, and the original rubber rear bushing is left in place, a mismatch will be created in the stiffness of the bushing materials. The more rigid front bushings will deflect less, while the remaining rubber rear bushing will still deflect as much as ever. This in turn will increase the stress on the aluminum front mounting ears of the differential housing. The increased stress can lead to fatigue and stress cracking of the aluminum differential housing. Wheel hop will still be prevalent because the rubber rear bushing will deflect and allow the differential to flop around.
