*All images are for illustration purpose only. Actual product may vary
 WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Maximum Motorsports
SKU : MM-MMTR-4
Maximum Motorsports 94-04 Mustang Adjustable Tie-Rod Ends/Bump Steer Kit (tapered stud) - MMTR-4
$149.00
Description

Details

Adjustable outer tie-rod ends for correcting bumpsteer, Bolt-through spindle style, 1994-04 Mustang

Fits:
1994-04 Mustang with 1994-04 front control arms
All stock power steering racks, 1994-04
All Mustang spindles, 1979-04
Non-MM aftermarket k-members that retain stock suspension geometry

Bumpsteer is a term for the situation where the front toe changes as the suspension moves up and down. If the toe changes more than a very small amount it will cause the car to change direction, making the car unstable and unpredictable. MM offers two types of Adjustable Tie-Rod Ends. The tapered stud type can be used to make moderate changes to the geometry. It is best suited for use with a stock K-member, and does not require any modification to the spindle. The bolt-through spindle type has a much wider range of adjustment. It is required for most situations when installing a MM K-Member and requires drilling out the tapered hole in the spindle to accept a 5/8" bolt.

The installation of any adjustable tie-rod end requires that your car be measured for bumpsteer. This can be done by following our copyrighted step-by-step instructions.

Vehicle Application(s)

This product fits the following models and years

ModelYear(s)
SVT Cobra1996 1997 1998 1999 2000 2001 2003 2004
Mustang GT1996 1997 1998 1999 2000 2001 2002 2003 2004
Mach-12003 2004
Reviews

Be the first to review this product

Write Your Own Review