Mcleod Shelby GT500 RXT Street...
Mcleod 2010 GT500 RXT Street Twin Disc Clutch Kit (Street) Includes: Mcleod RXT Clutch Mcleod Lightened Steel Flywheel NOTE: The 2010 GT50...//Shop Now
Lethal Performance 99-04 4V Budget Return Style Fuel System
Budget return fuel systems are intended to be used with STOCK fuel rails. May not work with aftermarket fuel rails.
Lethal Performance and DivisionX have done it again! This time we're going to change the way the fuel delivery market works by offering our customers the ability to go return style but without the entire cost of a full on return style fuel system. Even better, with this new budget return style system you'll still utilize the stock feed line, stock fuel rails and stock fuel tank. This system comes complete with everything you need. Just install it and get your car tuned for the return style setup and you're good to go.
NOTE: This system comes standard with Fragola PTFE fuel hose. PTFE fuel hose is more durable than the standard hose and prevents fuel smell typically found when using non PTFE hose.We have used the standard Fragola non-Teflon based fuel hose on several of our shop cars with both gasoline and E85 with excellent results and no fuel smell. If you would like the non PTFE hose please choose that option from the dropdown menu. If you decide to purchase this kit with the standard hose Lethal Performance will not be liable for claims of fuel smell after installation.
How's it work?
It starts with a DivisionX billet fuel hat that houses (2) return style Walbro GSS342 pumps. The fuel hat installs in your stock fuel tank. Then we use the DivisionX hat to stock line adapter to connect the hat to your stock feed line. The next piece is a industry changing adapter that installs a DivisionX two port fuel pressure regulator onto your stock rail. Included is a 100psi liquid filled mechanical fuel pressure gauge, vacuum hose and t-fitting which allows proper installation of the regulator. From the regulator we provide a -6an return line which returns the fuel back to the tank through the DivisionX fuel hat. The last piece of the kit is our famous Lethal Performance dual return style harness which features (2) 20amp relays, (2) 10ga power and ground wires and dual 10ga power wires from the battery. In addition our harness and hat use OEM 6 pin connectors to make it a plug and play setup which requires no soldering.
If you're unfamiliar with a return style kit here's how it works.
The fuel pumps are wired to run full time. Fuel pressure is set by the mechnical fuel pressure regulator. The excess fuel bleeds off the regulator through the return line and back to the tank. In this system we use a boost reference regulator. That means that for every 1psi of boost the regulator see's it's going to mechanically raise fuel pressure by 1psi. So if you start with a base pressure of 40psi and make 20psi of boost you'll end up seeing 60psi of fuel pressure when in full boost. What's great about a return style fuel system is that it's easy to tune, doesn't use any returnless style electronics and works great for both street and track applications. We run return style systems on our 2011 5.0L GT, 2010 GT500 and 03 Cobra. There's no reason to look back once we went return as we now know how well the return style system works.
DivisionX Dual Pump Return Style Fuel Hat
DivisionX Two Port Fuel Pressure Regulator
(2) Walbro GSS342 Fuel Pumps
DivisionX Hat to Stock Line Adapter
DivisionX Regulator to Rail Adapter
DivisionX FRPS Adapter
Vacuum line and T fitting
0-100 PSI Liquid Filled Mechanical Fuel Pressure Gauge
Lethal Performance Dual Pump Return Style Wiring Harness
All fittings and hardware needed for installation
E85 Coating STANDARD!
NOTE: All models EXCEPT 03-04 Cobra REQUIRE fuel level sender bracket p/n DX-37011 if stock level sender is being used. If using OEM 03-04 Cobra sender, bracket is not required.