*All images are for illustration purpose only. Actual product may vary
 WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
J2 Fabrication
J2 Fabrication 2007-2014 Shelby GT500 Flow Mod

* Required Fields



Product Description
The intercooler flow mod was created to combat the notorious heat soaking issues with the GT500 due to an under built A2W system when increasing boost and horsepower.Customers can expect to see anywhere from a 20* to 50*+ drop in IAT2 under wide open throttle conditions. The variance in temperature drops depends on each individual setup. In most conditions with a complete system users can expect to plateau IAT2 in the 100* range on straight water, and 80’s on ice.

Kit includes:
Inlet ported/milled from .500″ to .870″
Outlet ported/milled from .500″ to .870″
New flow tubes increased to .870″ I.D. from .552″ I.D.
CNC Billet End Adapter
1″ weld-on barbs for heat exchanger

Advantages to the flow mod over other options includes:
No need for icing in most cases
Air conditioning performance not sacrificed
Self recovers
Pulls more heat under WOT

For best performance the flow mod needs to be used in conjunction with a trunk mounted reservoir and aftermarket pump. Kit includes the parts needed to upgrade your heat exchanger and we offer this labor service as well.Customer supplied core is required for each purchase. Can be used with 07-12 Core, 13/14 Core, or KB Biggun
Vehicle Application(s)

This product fits the following models and years

SVT Shelby GT5002007 2008 2009 2010 2011 2012 2013 2014

Be the first to review this product

Write Your Own Review