Injector Dynamics 2000cc Injectors

CHOOSE VEHICLE YEAR AND MODEL FROM DROP DOWN

NOTE: The ID2000 injectors will not work with 03-04 Cobra's using the stock PCM.

The ID2000 has set the standard for linearity and control in a large injector.

Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a smooth stoichiometric idle on small bore engines running E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm.

With a pressure capability of 9 bar this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.

Follow the shortcut links below for specific information, or scroll down to see all data for the ID2000.

Basic Specifications

Nominal Flow Rate - 2225cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 9.0 Bar (130.5 psi)
Fuel Compatibility - Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.
Electrical Connector - Denso

NOTE: ID Injector Harness Adapters are required for installation of the ID 2000cc Injectors in ALL model vehicles. Minitimer (rectangle) connectors come on most mid 2000 and earlier model vehicles, where USCAR (rounded) connectors come on most later model vehicle. Verify your vehicles connector type and choose the correct adapter from the drop down menu.