*All images are for illustration purpose only. Actual product may vary
 WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
SKU : HUR-5671521

Hurst 05-09 Mustang Line Lock Kit

Mustang performance parts, performance and tuning
Customer Reviews


The Hurst Roll Control kit for your 2005 to 2009 Ford Mustang models that have the ability to fully remove traction control is primarily used in drag racing to lock the front wheels allowing for more consistent burnouts.

Features and Benefits
Roll Control Complete Kit
Locks Front Brakes
Used in Drag Racing
Hurst Quality
Vehicle Application(s)

This product fits the following models and years

Mustang GT2005 2006 2007 2008 2009
SVT Shelby GT5002007 2008 2009
Mustang V62005 2006 2007 2008 2009

Customer Reviews 1 item(s)

Installation took some time, but works well once it stopped leaking
The kit comes with everything you need. Beautiful brake lines that are tailored for your Mustang, a lot of wire, mounting bracket, and a switch. I started by installing the hardware in the engine bay, got everything tight and routed. Then for some reason, I could not get the lines to stop leaking. All the leakage seemed to be coming from the new lines provided in the kit. I took it apart a few times, cleaned everything, and even got out my flange tools to try to fix the flanges. Eventually, I reached out to LMR, and they reached out to Holley (maker of the Hurst kit). They shipped me new lines very quickly. Just to be safe, I wanted to replace the adapters as well, so I called Holley and purchased replacement adapters. Finally, when I had new parts, I installed everything again, and I was able to get all the lines to be leak free (after a couple of times of applying slight extra torque). I think the key difference was that I modified the mounting plate to allow for a bit more flexibility in terms of angling the solenoid.

BTW I had to cut off a part of the mounting plate as it would have rubbed up against my valve covers.

I paired this kit with a shifter knob from Twisted ShifterZ and a green LED activation switch.

Overall, once installed it works well. However, a word of caution, doing burnouts on dry concrete on drag radials is not good on the stock clutch... Review by Buzz / (Posted on 1/17/2022)

Write Your Own Review

Recently viewed products